NG-RAN and 5G-NR. Frédéric Launay
ection id="u12299bc5-19c8-5109-9d41-ac4c6c462a3d">
Table of Contents
1 Cover
4 Preface
5 1 NG-RAN Network – Functional Architecture 1.1. Functional architecture NSA/SA 1.2. Description of the NG-RAN network 1.3. Functional separation between the NG-RAN radio interface and the 5G core network 1.4. Scheduling and QoS 1.5. Security architecture 1.6. Network slicing 1.7. References
6 2 NG-RAN Network – Protocol Architecture 2.1. The protocol architecture of the radio interface 2.2. Procedures on the radio network access 2.3. Identities of the XnAP and NG-AP application protocols 2.4. References
7 3 NG-RAN Network – Procedures 3.1. General procedure of the 5G-NSA mode 3.2. General procedures of the 5G-SA 3.3. References
8 4 5G-NR Radio Interface – The Physical Layer 4.1. 5G-NR radio interface 4.2. TDD mode configurations 4.3. Physical resource 4.4. Physical channels and physical signals 4.5. Downlink transmission 4.6. Transmission in uplink 4.7. References
9 5 5G-NR Radio Interface – Operations on the Frequency Bands 5.1. Operations on the frequency bands 5.2. Carrier aggregation 5.3. Supplementary UpLink (SUL) 5.4. Synchronization on the secondary cell 5.5. References
10 6 5G-NR Radio Interface – MIMO and Beamforming 6.1. Multiplexing techniques 6.2. Antenna port 6.3. Uplink Control Information (UCI) 6.4. PDSCH transmission 6.5. PUSCH transmission 6.6. Beamforming management 6.7. References
11 7 5G-NR Radio Interface – Bandwidth Part 7.1. Bandwidth part 7.2. CORESET 7.3. BWP switching procedure 7.4. References
12 8 5G-NR Radio Interface – Data Link Layer 8.1. SDAP protocol 8.2. PDCP 8.3. RLC protocol 8.4. MAC protocol 8.5. References
13 9 5G-NR Radio Interface – Radio Access Procedure 9.1. System information 9.2. Connection management 9.3. Measurement configuration 9.4. References
14 Index
Guide
1 Cover
5 Preface
7 Index
List of Illustrations
1 Chapter 1Figure 1.1. Deployment in the SA modeFigure