CompTIA A+ Practice Tests. Docter Quentin

CompTIA A+ Practice Tests - Docter Quentin


Скачать книгу
assembly, heating element

      ■ Special thermal paper

      ■ Impact

      ■ Print head, ribbon, tractor feed

      ■ Impact paper

      ■ Virtual

      ■ Print to file

      ■ Print to PDF

      ■ Print to XPS

      ■ Print to image

      ✔ 1.15 Given a scenario, perform appropriate printer maintenance.

      ■ Laser

      ■ Replacing toner, applying maintenance kit, calibration, cleaning

      ■ Thermal

      ■ Replace paper, clean heating element, remove debris

      ■ Impact

      ■ Replace ribbon, replace print head, replace paper

      ■ Inkjet

      ■ Clean heads, replace cartridges, calibration, clear jams

      1 What is the distance limitation of the FireWire 800 standard when implemented over fiber-optic cable?

      A. 4.5 meters

      B. 100 meters

      C. 400 meters

      D. 800 meters

      2 Which motherboard form factor measures 6.7″ × 6.7″?

      A. Mini-ITX

      B. Nano-ITX

      C. Pico-ITX

      D. Mobile-ITX

      3 Which of the following statements are not true regarding CPUs and operating systems? (Choose two.)

      A. A 32-bit OS can run only on a 32-bit CPU.

      B. A 64-bit OS can run only on a 64-bit CPU.

      C. A 64-bit OS can run on a 32-bit CPU or a 64-bit CPU.

      D. A 32-bit OS can run on a 32-bit CPU or a 64-bit CPU.

      4 The DCPS within a laser printer converts AC power into what three voltages? (Choose three.)

      A. +5VDC

      B. – 5VDC

      C. +24VDC

      D. – 24VDC

      5 Identify the cable type shown here.

Photograph shows the cord with three different round headed plug points, which are having metal pins surrounded with fiber materials and cables attached to it are joined together.

      A. Component

      B. Composite

      C. Coaxial

      D. RCA

      6 A technician is looking to buy a new LCD monitor. Which type of LCD monitor has faster response times and is less expensive than others?

      A. TN

      B. IPS

      C. LED

      D. Plasma

      7 Which computer peripheral is most likely to use a mini-DIN 6 connector?

      A. Keyboard

      B. Monitor

      C. Hard drive

      D. Sound card

      8 Which type of storage device is composed of a conventional hard drive and a substantial amount of solid-state storage?

      A. SSD

      B. HDD

      C. Mesh

      D. Hybrid

      9 An administrator ordered replacement printer paper that is a thicker caliper than recommended by the printer manufacturer. What is the biggest risk in using this paper?

      A. Smeared images

      B. Paper will not feed

      C. Paper jams

      D. Images will not print

      10 You need to share printers on your network with multiple client operating systems, such as Windows, macOS, and Linux. Which of the following services will best meet your needs?

      A. Bonjour

      B. AirPrint

      C. TCP printing

      D. Virtual printing

      11 Which one of the following connector types are you most likely to find on the end of a CAT6a cable?

      A. RJ-11

      B. RJ-45

      C. BNC

      D. SATA

      12 Identify the video connector shown here.

Photograph shows square shaped equipment with combination of both metal and fiber materials in it, one edge of it displays buttons on it with two screws given at corners of the equipment.

      A. DVI

      B. VGA

      C. HDMI

      D. Composite

      13 What type of printer technology will often use a roll of paper as opposed to individual sheets?

      A. Ink-jet

      B. Thermal

      C. Laser

      D. Fax machine

      14 Which RAM feature will detect errors within memory but is not able to fix them?

      A. Parity

      B. Non-parity

      C. ECC

      D. Non-ECC

      15 Which of the following types of printers require the replacement of some sort of ink or toner? (Choose all that apply.)

      A. Laser

      B. Thermal

      C. Impact

      D. Ink-jet

      16 You are working on repairing a defective laser printer. Which of the following is a true statement regarding the imaging drum in a laser printer?

      A. It can hold a charge only when it’s not exposed to light.

      B. It can hold a charge only when it’s exposed to light.

      C. It can hold a charge regardless of light exposure.

      D. It is not required to hold a charge.

      17 What are the dimensions of a micro-ATX motherboard?

      A. 12″ × 9.6″

      B. 9.6″ × 9.6″

      C. 6.7″ × 6.7″

      D. 3.9″ × 2.8″

      18 When discussing video monitors, what is the term used to describe the number of pixels used to draw


Скачать книгу

<p>1</p>

B. FireWire 800 can span 100 meters when implemented over fiber-optic cable. Over copper cable, it’s limited to 4.5 meters, like FireWire 400.

<p>2</p>

A. A mini-ITX motherboard is a 6.7″ square. Nano-ITX motherboards are 4.7″ square, pico-ITX motherboards are 3.9″ × 2.8″, and mobile-ITX motherboards are 2.4″ square.

<p>3</p>

A, C. A 32-bit OS can run on either a 32-bit or 64-bit processor, although you will not be able to fully utilize the 64-bit processor’s capabilities with a 32-bit OS. A 64-bit OS will run only on a 64-bit processor.

<p>4</p>

A, B, C. The DC power supply (DCPS) converts house current into three voltages: +5VDC and –5VDC for the logic circuitry and +24VDC for the paper-transport motors.

<p>5</p>

A. Three RCA-like connectors at the end of a cable indicate a component video cable.

<p>6</p>

A. The two most popular methods of manufacturing LCD panels are twisted nematic (TN) and in-plane switching (IPS). Of the two, IPS is regarded as having the best color representation in all angles, while TN is faster and less expensive. LED and plasma are not types of LCD panels.

<p>7</p>

A. A mini-DIN 6 connector is a round connector often called a PS/2 connector. It’s historically used for a keyboard or a mouse. If you have only more modern USB peripherals, you can buy a PS/2 to USB adapter to plug them into one of these ports.

<p>8</p>

D. A hybrid hard drive is a combination of a conventional magnetic hard disk drive and solid-state storage. The goal is to increase access speed for commonly accessed data while still providing larger capacity similar to a conventional HDD.

<p>9</p>

C. Thicker paper can cause paper jams, especially in printers with curved paper paths. Paper that is too thin may not get picked up by the printer rollers at all.

<p>10</p>

C. TCP printing allows client with different OSs to send jobs directly to printers without worrying about intra-OS conflicts. Bonjour and AirPrint are both Apple services, and virtual printing allows you to print output to documents such as PDF files. Whenever sharing printers for remote printing, be sure to set proper user authentication on the print device.

<p>11</p>

B. A CAT6a cable is a network cable, and you are most likely to find an RJ-45 connector at the end of it. RJ-11 connectors are for phone lines. BNC connectors are network connectors but are typically used with coaxial cable. SATA connectors are hard drive connectors.

<p>12</p>

A. The connector shown is a DVI connector, used for digital video.

<p>13</p>

B. Thermal printers will often use a roll of paper as opposed to individual sheets. Fax machines may use thermal technology, but a fax machine in itself is not a printer technology.

<p>14</p>

A. Parity checking is a rudimentary RAM error-checking scheme that offers no error correction.

<p>15</p>

A, C, D. Laser printers need toner cartridges, impact printers need ink ribbons, and ink-jet printers use ink cartridges. Thermal printers heat up paper to produce images.

<p>16</p>

A. An imaging drum is a photosensitive drum that can hold a charge if it’s not exposed to light. It is dark inside an EP printer, except when the laser scanning assembly shines on particular areas of the photosensitive drum.

<p>17</p>

B. A micro-ATX motherboard is a 9.6″ square. ATX motherboards are 12″ × 9.6″, mini-ITX motherboards are 6.7″ × 6.7″, and pico-ITX motherboards are 3.9″ × 2.8″.

<p>18</p>

D. Resolution is the number of pixels used to draw a computer screen. Refresh rate determines how many times per second the screen can be redrawn. Frame rate tells you how many frames per second the original content was filmed in. Aspect ratio defines the dimensions (width × height) of an image.