Effective Product Control. Nash Peter

      The current market is a mix of both models but has been more heavily skewed towards the captive model. My preference would be to use a captive model, as it gives you more control and influence over your workforce.

      The next question, which may be less relevant if the work is outsourced, will be whether the work remains within the same country or not. Work sent to a cheaper location within the same country is known as nearshoring and work sent overseas is known as offshoring.

      In 2013, recruitment firm Mondrian Alpha prepared a report that examined the offshoring/outsourcing and nearshoring activities undertaken by several large banks.1 Many of their findings still provide a good overview of the changing landscape of product control. Highlights from the report include:

      • The goal of the overall offshoring programme is to have a higher quality product control function at a significantly reduced cost. This is achieved through having simpler production type work performed in cheaper locations, leaving a thin layer onshore to provide advisory services to the front office.

      • Top locations for offshoring include India, China, the Philippines, Brazil, South Africa, Poland, and Hungary.

      • Offshoring becomes easier when:

      • Nearshoring is an attractive option as it keeps teams within the same country but in less expensive cities. Nearshoring avoids some of the challenges of offshoring, such as inconsistent time zones, shallow offshore talent pools and clashes of cultures. All this ultimately results in closer cooperation within product control and the bank.

      My View

      There is always a risk and reward trade-off for every investment and offshoring is no different. The main reward for a bank is a lower cost base, whilst the major risk is a weakened control framework. A bank needs to keep in mind that a weakened control framework is more prone to an operational risk event, which can cause losses that dwarf the benefit from the best cost-saving programmes. Rogue trading is just one of the operational risks that can be more difficult to detect when product control is offshored. Just think of the losses sustained by UBS ($2.3 billion)2 and Société Générale (€4.9 billion)3 through unauthorized trading! While the potential role of offshore product control in these cases is undetermined, when oversight is distanced from trading activity, the risk of rogue trading increases.

      Risky Choices

      In my view, the control framework is most at risk of being weakened when the following choices are made.

      Unskilled Staff

      If the bank chooses to employ offshore staff with very little or no product control experience, the level of operational risk automatically increases. Banks may be forced to do this if they are establishing an office in a city where a product control talent pool does not exist or the working hours are unattractive for experienced controllers (e.g. 3 a.m. starts).

      Offshoring Is Rushed

      Offshoring cannot be rushed! The control framework, skills and experience of the incumbent team has taken many years to develop and this set-up cannot be replicated immediately by the new team.

      Consequently, the transfer of work should occur methodically to enable the bank to learn lessons from each transfer phase. It also allows the bank to retain more of the onshore controllers after the first phase(s) has been executed, to assist with any negative fallouts.

      Benefits

      In addition to cost savings, the other significant benefit of offshoring is the standardization of processes. Although a bank can standardize without offshoring, it often provides the catalyst for such change.

      Life Post-Offshoring for Onshore Product Controllers

      Offshoring can have benefits and drawbacks for the controllers left onshore. The most significant benefit for onshore controllers is the quantity of production work left onshore will be significantly less. This change should now free up time for onshore controllers to perform more analytical work.

      The type of analytical work can vary at each bank, but typically the controller will analyse those components of the financials which can have a significant influence on the behaviour of the desk. This can vary quarter by quarter, but some examples include balance sheet usage, brokerage fees, capital, liquidity, return on assets, and so on.

      Additionally, the controller will spend more time analysing the health of the control framework in finance to ensure the level of operational risk is not excessive. You could say that this role is becoming more akin to a CFO role.

      The reality of a trading environment means additional work will always arise, yet cannot be anticipated. The main drawback for onshore staff post-offshoring is how to meet the demands of their new role with a reduced headcount.

      As previously they were the controllers running reports and performing checks, but now they are receiving a finished product from their offshore colleagues and assessing its quality, this change throws up a need for onshore controllers to adapt and grow. This requires a different skill set and it can be quite frustrating at first, especially when the offshore person performing the work may have far less experience than they do. This change is a transitory period and the frustration should ease with time as respect and rapport between the onshore and offshore teams grows.

      In addition to this, the question a bank must ask themselves is where will the next generation of onshore product controllers emerge from? From experience, I know that it can be difficult to manage a product control team effectively when you have no experience of the bank's systems and controls, let alone if you have no product control experience.

      I expect the offshore and near shore controllers to grow in experience and take on more of the responsibilities that used to reside onshore. In this case, the onshore product control team as we now know it will become extinct and will be replaced by a pure CFO role.

      XVA

      Another of the significant changes for product control centres around the valuation adjustments now being made to OTC derivatives and funding liabilities where the fair value option is elected.

      XVA is the collective acronym used for valuation adjustments such as counterparty credit (CVA), own credit (DVA), funding uncollateralized derivatives (FVA), margin (MVA) and capital (KVA). This list continues to grow and VAs continue to be refined over time.

      Although CVA and DVA were pricing considerations before the GFC, the GFC elevated their importance as the cost of credit risk rose significantly. This change affected both OTC derivatives and fair valued funding liabilities.

      FVA emerged during the GFC when, also due to the spike in credit risk, OIS (overnight indexed swaps) and LIBOR (London Interbank Offered Rate) yields dislocated and their basis widened. Traders were forced to capture the cost or benefit of funding uncollateralized derivatives into their OTC derivatives.

      In response to these developments, banks established trading desks dedicated to the pricing and risk management of CVA/DVA and FVA, often referred to as the XVA desk.

      As the desk started to price these different