Flow-Induced Vibration Handbook for Nuclear and Process Equipment. Группа авторов
F.M. and Fisher, N.J., 1999, “Steam Generator Fretting‐Wear Damage: A Summary of Recent Findings,” ASME Journal of Pressure Vessel Technology, 121, pp. 304–310.
7 McAdams, W.H., Woods, W.K., and Herman, L.C., 1942, “Vaporization Inside Horizontal Tubes‐II‐Benzene‐Oil Mixtures,” Trans. ASME, 64, pp. 193–200.
8 McNaught, J. M., 1982, “Two‐phase Forced Convection Heat Transfer during Condensation on Horizontal Tube Bundles,” 7th International Heat Transfer Conference, 5, Munich, pp. 125–131.
9 Owen, P.R., 1965, “Buffeting Excitation of Boiler Tube Vibration,” Journal of Mechanical Engineering Science, 7, pp. 431–439.
10 Pettigrew, M.J. and Gorman, D.J., 1981, “Vibration of Heat Exchanger Tube Bundles in Liquid and Two‐Phase Cross‐Flow,” Proceedings of the ASME Pressure Vessel and Piping Conference, San Francisco, California, 1980 August, Vol. 52, pp. 89–110.
11 Pettigrew, M.J. and Taylor, C.E., 1991, “Fluidelastic Instability of Heat Exchanger Tube Bundles: Review and Design Recommendations,” ASME Journal of Pressure Vessel Technology, 113, pp. 242–256.
12 Pettigrew, M.J. and Taylor, C.E., 1994, “Two‐Phase Flow‐Induced Vibration: An Overview,” ASME Journal of Pressure Vessel Technology, 116, pp. 233–253.
13 Pettigrew, M.J. and Taylor, C.E., 1997, “Damping of Heat Exchanger Tubes in Two‐Phase Flow,” Proceedings, 4th International Symposium on FSI, AE & FIV+N, ASME International Congress, Dallas, Texas, November 16‐21, AD‐Vol 53.2, pp. 407–418.
14 Pettigrew, M.J., Platten, J.L. and Sylvestre, Y., 1973, “Experimental Studies on Flow‐Induced Vibration to Support Steam Generator Design, Part II: Tube Vibration Induced by Liquid Cross‐Flow in the Entrance Region of a Steam Generator,” International Symposium on Vibration Problems in Industry, Keswick, UK, April.
15 Pettigrew, M.J., Sylvestre, Y. and Campagna, A.O., 1978, “Vibration Analysis of Heat Exchanger and Steam Generator Designs,” Nuclear Engineering and Design, 48, pp. 97–115.
16 Pettigrew, M.J., Goyder, H.G.D., Qiao, Z.L. and Axisa, F., 1986, “Damping of Multispan Heat Exchanger Tubes, Part 1: In Gases,” Symposium on Special Topics of Structural Vibration, 104, ASME PVP Conference, Chicago, pp. 81–88.
17 Pettigrew, M.J., Taylor, C.E. and Kim, B.S., 1989a, “Vibration of Tube Bundles in Two‐Phase Cross‐Flow: Part 1, Hydrodynamic Mass and Damping,” ASME Journal of Pressure Vessel Technology, 111, pp. 466–477.
18 Pettigrew, M.J., Tromp, J.H., Taylor, C.E. and Kim, B.S., 1989b, “Vibration of Tube Bundles in Two‐Phase Cross‐Flow: Part 2, Fluidelastic Instability,” ASME Journal of Pressure Vessel Technology, 111, pp. 478–487.
19 Pettigrew, M.J., Carlucci, L.N., Taylor, C.E. and Fisher, N.J., 1991, “Flow-Induced Vibration and Related Technologies in Nuclear Components,” Nuclear Engineering and Design, 131, pp. 81–100.
20 Pettigrew, M.J., Taylor, C.E. and Yasuo, A., 1994, “Vibration Damping of Heat Exchanger Tube Bundles in Two‐Phase Flow,” Pressure Vessel Research Council Bulletin WRC 389, pp. 1–41.
21 Pettigrew, M.J., Taylor, C.E., Jong, J.H. and Currie, I.G., 1995, “Vibration of a Tube Bundle in Two‐Phase Freon Cross Flow,” ASME Journal of Pressure Vessel Technology, 117, pp. 321–329.
22 Pettigrew, M.J., Yetisir, M., Fisher, N.J., Smith, B.A.W. and Taylor, C.E., 1999, “Prediction of Vibration and Fretting‐Wear Damage: An Energy Approach,” Proceedings, ASME‐PVP Symposium on Flow‐Induced Vibration ‐ 1999, Boston, USA, August 1‐5, PVP‐Vol. 389, pp. 283–290.
23 Pettigrew, M. J., Rogers, R. J. and Axisa, F., 2011, “Damping of Heat Exchanger Tubes in Liquids: Review and Design Guidelines,” Journal of Pressure Vessel Technology, 133, 014002‐1‐11.
24 Pietralik, J.M., 1995, “Thermal‐Hydraulic Analysis of Steam Generators: Application of the THIRST Code to Vibration Analysis,” Session 3.1, Proceedings of the 16th Annual Conference of the Canadian Nuclear Society, Vol. II, Saskatoon, Saskatchewan, June 4‐7.
25 Rogers, R.J., Taylor, C.E. and Pettigrew, M.J., 1984, “Fluid Effects on Multispan Heat Exchanger Tube Vibration,” Proceedings of the ASME Pressure Vessels and Piping Conference, San Antonio, Texas, June, ASME Publication H00316: Topics in Fluid Structure Interaction, pp. 17–26.
26 Taylor, C.E. and Pettigrew, M.J., 1998, “Guidelines for Random Excitation Forces due to Cross Flow in Steam Generators,” Third International Steam Generator and Heat Exchanger Conference, Canadian Nuclear Society, Toronto, Canada, June 21‐25, pp. 752–763.
27 Taylor, C.E. and Pettigrew, M.J., 2000, “Random Excitation Forces in Heat Exchanger Tube Bundles,” Journal of Pressure Vessel Technology, 122, pp. 509–514.
28 Taylor, C.E., Currie, I.G., Pettigrew, M.J. and Kim, B.S., 1989, “Vibration of Tube Bundles in Two‐Phase Cross‐Flow: Part 3, Turbulence‐Induced Excitation,” ASME Journal of Pressure Vessel Technology, 111, pp. 488–500.
29 Taylor, C.E., Boucher, K.M. and Yetisir, M., 1995, “Vibration and Impact Forces Due to Two‐Phase Cross Flow in U‐Bend Regions of Nuclear Steam Generators,” Proceedings of the 6th International Conference on Flow‐Induced Vibration, London, UK, April 10‐12, pp. 401–411.
30 Taylor, C.E., Pettigrew, M.J., and Currie, I.G., 1996, “Random Excitation Forces Acting on Tube Bundles Subjected to Two‐Phase Cross Flow,” Journal of Pressure Vessel Technology, 118, pp. 265–277.
31 Weaver, D.S., Fitzpatrick, J.A. and El Kashlan, M., 1987, “Strouhal Numbers for Heat Exchanger Tube Arrays in Cross Flow,” Journal of Pressure Vessel Technology, 109, pp. 219–223.
32 Yetisir, M. and Fisher, N.J., 1996, “Fretting‐Wear Prediction in Heat Exchanger Tubes: The Effect of Chemical Cleaning and Modelling Ill‐Defined Support Conditions,” Proceedings, ASME‐PVP Symposium on Flow‐Induced Vibration ‐ 1996, Montreal, Canada, July 21‐26, PVP‐Vol. 328, pp. 359–368.
33 Yetisir, M., McKerrow, E. and Pettigrew, M.J., 1998, “Fretting‐Wear Damage of Heat Exchanger Tubes: A Proposed Criterion Based on Tube Vibration Response,” Journal of Pressure Vessel Technology, 120, No. 3, pp. 297–305.
34 Ziada, S., Oengoren, A. and Buhlmann, E.T., 1989, “On Acoustical Resonances in Tube Arrays Part II: Damping Criteria,” Journal of Fluids and Structures, 3, pp. 315–324.
Note
1 1 Inconel and Incoloy are registered trademarks of International Nickel Company.
Конец ознакомительного фрагмента.
Текст предоставлен ООО «ЛитРес».
Прочитайте эту книгу целиком, купив полную легальную версию на ЛитРес.
Безопасно оплатить книгу можно банковской картой Visa, MasterCard, Maestro, со счета мобильного телефона, с платежного терминала, в салоне МТС или Связной, через PayPal, WebMoney, Яндекс.Деньги, QIWI Кошелек, бонусными картами или другим удобным Вам способом.