Criminal Code Act. Australia
as in the Convention.
place of public use has the same meaning as in the Convention.
public transportation system has the same meaning as in the Convention.
Subdivision B
Plastic explosives
72.11 Purpose
The purpose of this Subdivision is to create offences relating to plastic explosives and give effect to the Convention on the Marking of Plastic Explosives.
Note: The Convention requires the introduction of detection agents into plastic explosives so as to render the explosives detectable by vapour detection means. This is known as the marking of the explosives.
72.12 Trafficking in unmarked plastic explosives etc.
(1) A person commits an offence if:
(a) the person traffics in a substance; and
(b) the substance is a plastic explosive; and
(c) the plastic explosive breaches a marking requirement; and
(d) the trafficking is not authorised under section 72.18, 72.19, 72.20, 72.21, 72.22 or 72.23.
Penalty: Imprisonment for 10 years.
(2) The fault element for paragraph (1)(b) is recklessness.
(3) Strict liability applies to paragraphs (1)(c) and (d).
Note 1: For the marking requirements, see section 72.33.
Note 2: For defences, see section 72.16.
72.13 Importing or exporting unmarked plastic explosives etc.
(1) A person commits an offence if:
(a) the person imports or exports a substance; and
(b) the substance is a plastic explosive; and
(c) the plastic explosive breaches a marking requirement; and
(d) the import or export is not authorised under section 72.18, 72.19, 72.20, 72.22 or 72.23.
Penalty: Imprisonment for 10 years.
(2) The fault element for paragraph (1)(b) is recklessness.
(3) Strict liability applies to paragraphs (1)(c) and (d).
Note 1: For the marking requirements, see section 72.33.
Note 2: For defences, see section 72.16.
72.14 Manufacturing unmarked plastic explosives etc.
(1) A person commits an offence if:
(a) the person:
(i) engages in the manufacture of a substance; or
(ii) exercises control or direction over the manufacture of a substance; and
(b) the substance is a plastic explosive; and
(c) the plastic explosive breaches the first marking requirement; and
(d) the manufacture is not authorised under section 72.18 or 72.21.
Penalty: Imprisonment for 10 years.
(2) The fault element for paragraph (1)(b) is recklessness.
(3) Strict liability applies to paragraphs (1)(c) and (d).
Note 1: For the marking requirements, see section 72.33.
Note 2: For defences, see section 72.16.
72.15 Possessing unmarked plastic explosives etc.
(1) A person commits an offence if:
(a) the person possesses a substance; and
(b) the substance is a plastic explosive; and
(c) the plastic explosive breaches a marking requirement; and
(d) the possession is not authorised under section 72.18, 72.19, 72.20, 72.21, 72.22 or 72.23.
Penalty: Imprisonment for 2 years.
(2) The fault element for paragraph (1)(b) is recklessness.
(3) Strict liability applies to paragraphs (1)(c) and (d).
Note 1: For the marking requirements, see section 72.33.
Note 2: For defences, see section 72.16.
72.16 Defences
(1) If:
(a) a person is charged with an offence against section 72.12, 72.13, 72.14 or 72.15; and
(b) the prosecution alleges that the plastic explosive breached a particular marking requirement;
it is a defence if the defendant proves that he or she had no reasonable grounds for suspecting that the plastic explosive breached that marking requirement.
Note 1: A defendant bears a legal burden in relation to the matter in subsection (1) (see section 13.4).
Note 2: For the marking requirements, see section 72.33.
(2) If:
(a) a person is charged with an offence against section 72.12, 72.13 or 72.15; and
(b) the prosecution alleges that the plastic explosive breached the second marking requirement;
it is a defence if the defendant proves that, at the time of the alleged offence:
(c) the plastic explosive contained a detection agent; and
(d) the concentration of the detection agent in the plastic explosive was not less than the minimum manufacture concentration for the detection agent; and
(e) the detection agent was homogenously distributed throughout the plastic explosive.
Note 1: A defendant bears a legal burden in relation to the matter in subsection (2) (see section 13.4).
Note 2: For the marking requirements, see section 72.33.
Note 3: For minimum manufacture concentration, see section 72.34.
72.17 Packaging requirements for plastic explosives
(1) A person commits an offence if:
(a) the person manufactures a substance; and
(b) the substance is a plastic explosive; and
(c) within 24 hours after the manufacture of the plastic explosive, the person does not cause the plastic explosive to be contained, enclosed or packaged in a wrapper with:
(i) the expression “PLASTIC EXPLOSIVE” (in upper-case lettering); and
(ii) the date of manufacture of the plastic explosive; and
(iii) if the plastic explosive is of a prescribed type — that type; and
(iv) if the plastic explosive contains a detection agent for the purpose of meeting the first marking requirement — the name of the detection agent; and
(v) if the plastic explosive contains a detection agent for the purpose of meeting the first marking requirement — the concentration of the detection agent in the plastic explosive at the time of manufacture, expressed as a percentage by mass;
legibly displayed on the outer surface of the wrapper.
Penalty: Imprisonment for 2 years.
(2) The fault element for paragraphs (1)(b) and (c) is recklessness.
72.18 Authorisation for research etc.
Authorisation
(1) A responsible Minister may, by writing, authorise:
(a)