Automatic Pistols Assembly/Disassembly. J B Wood
alt="c9"/>
3. Lift the rear of the recoil spring guide from its step on the locking block and remove the guide and spring toward the rear.
4. Push the plunger at the rear of the barrel assembly to move the locking block from its recesses in the slide.
5. Move the barrel forward to clear the extractor, then remove the barrel downward from the slide. Gun is now field-stripped.
Beretta 951 field-stripped
Detail Strip:
6. The takedown-latch is retained in the frame only by friction from a circular spring on the right side, and the latch is easily pulled out toward the right.
7. The locking block is retained by a screw at the front of the barrel underlug. After removal of the screw, the block can be tipped outward to its limit and slid on toward the side. Note that the screw is staked at the factory and routing removal is neither easy nor advisable. The locking block plunger at the rear is also staked in place and the same advice applies. If necessary, it can be drifted out toward the rear.
Конец ознакомительного фрагмента.
Текст предоставлен ООО «ЛитРес».
Прочитайте эту книгу целиком, купив полную легальную версию на ЛитРес.
Безопасно оплатить книгу можно банковской картой Visa, MasterCard, Maestro, со счета мобильного телефона, с платежного терминала, в салоне МТС или Связной, через PayPal, WebMoney, Яндекс.Деньги, QIWI Кошелек, бонусными картами или другим удобным Вам способом.