Machine Designers Reference. J. Marrs
ection id="u8667caf3-3ef1-52f5-8e3d-34d6706ccba7">
MACHINE
DESIGNERS
REFERENCE
Jennifer Marrs, P.E.
Industrial Press, Inc.
New York
Library of Congress Cataloging-in-Publication Data
Marrs, Jen.
Machine designers reference / Jen Marrs.
p. cm.
Includes bibliographical references and index.
ISBN 978-0-8311-3443-3 (hard cover)
1. Machine design–Handbooks, manuals, etc.
2. Mechanical engineering–Handbooks, manuals, etc. I. Title.
TJ230.M37 2011
621.8′15–dc23
2011030875
Industrial Press, Inc.
989 Avenue of the Americas
New York, NY10018
Sponsoring Editor: John Carleo
Interior Text and Cover Design: Janet Romano
Developmental Editor: Robert Weinstein
Copyright © 2012 by Industrial Press Inc., New York. Printed in the United States of America. All rights reserved. This book, or any parts thereof, may not be reproduced, stored in a retrieval system, or transmitted in any form without the permission of the publisher.
SOLIDWORKS is a registered trademark of Dassault Systémes SolidWorks Corporation
Information contained in this work has been obtained by Industrial Press Inc. from sources believed to be reliable. However, neither Industrial Press or its authors guarantee the accuracy or completeness of any information published herein and neither Industrial Press nor its authors shall be responsible for any errors, omissions, or damages arising out of the use of this information. This work is published with the understanding that Industrial Press and its authors are supplying information but are not attempting to render engineering or other professional services. If such services are required, the assistance of an appropriate professional should be sought.
Many pieces of art have be redrawn by Lineworks, Inc.
Composition was created by Lapiz Digital
10 9 8 7 6 5 4 3 2 1
BRIEF TABLE OF CONTENTS
Chapter 2:Ergonomics and Machine Safety (Co-written with E. Smith Reed, P.E.)
2.2:Machine Safety: Design Process
Chapter 3:Dimensions and Tolerances
3.1:Limits, Fits, and Tolerance Grades
3.2:Tolerances on Drawings, and GD&T
3.3:Tolerance Stack-Ups (Written by Charles Gillis, P.E.)
Chapter 4:Precision Locating Techniques (Written by Charles Gillis, P.E.)
Chapter 5:Pins, Keys, and Retaining Rings
Chapter 6:Pipe Threads, Threaded fasteners, and Washers
6.1:Pipe and Port Threads
6.2:Threaded Fasteners and Washers
Chapter 7:Welds and Weldments
Chapter 8:Materials, Surfaces, and Treatments
8.1:Materials
8.2:Surface Finish
8.3:Heat Treatment
8.4:Surface Treatment
Chapter 9:Force Generators
9.1:Springs
9.2:Pneumatics
9.3:Electric Motors
Chapter 10:Bearings
10.1:Plain Bearings
10.2:Rolling Element Bearings
10.3:Linear Bearings
Chapter 11:Power Transmission Devices
11.1:Shafts
11.2:Shaft Couplings
11.3:Gears (Written by Gregory Aviza)
11.4:Gearboxes
11.5:Belts and Chains
11.5.1:Belts
11.5.2:Chains
11.6:Lead, Ball, and Roller Screws
Chapter 12:Machine Reliability and Performance
Index
COMPLETE TABLE OF CONTENTS