Beginning AutoCAD 2015. Cheryl R. Shrock
Drawing.
Note: Do not use the New tool if you want to open an existing drawing.Refer to page 2-19 to OPEN an existing drawing file.
HOW TO START A NEW DRAWING
1.Select the NEW tool from the Quick Access Toolbar.
2.Select the 2015-Workbook Helper.dwt from the list of templates.
Note: If you do not have this template, refer to page 2-2 for instructions.
3.Select the Open button.
OPENING AN EXISTING DRAWING FILE
Opening an Existing Drawing File means that you would like to open, on to the screen, a drawing that has been previously created and saved. Usually you are opening it to continue working on it or you need to make some changes.
1.Select the OPEN tool on the Quick Access Toolbar.
2.Locate the Directory and Folder in which the file had previously been saved.
3.Select the File that you wish to OPEN.
4.Select the Open button.
The File Tabs tool allows you to have multiple drawings open at the same time. If the File Tabs tool is switched on (on by default), you can open existing saved drawings or create new ones.
The File Tabs tool is located on the Interface panel of the View tab, and is a Neon Blue color when switched on.
How to open an existing saved drawing from the File Tabs
1.Right mouse click on the ‘+’ icon.
2.Select Open from the menu.
4.Locate the Directory and Folder for the previously saved file. (Refer to page 2-19)
5.Select the File you wish to open.
6.Select the Open button.
How to open a new drawing from the Files Tab.
1.Right mouse click on the ‘+’ icon. (Refer to page 2-20)
2.Select Drawing Template (*.dwt) from the Files of type drop-down list.
3.Select the Template you require.
4.Select the Open button.
Note: If you right mouse click on any File Tab a menu appears with various options, including closing all open drawing tabs except the one you just clicked on.
You can also select a New Tab page where you can access online resources and the Learn and Create pages. (Refer to page 1-2) You can also left mouse click on the ‘+’ icon to access the New Tab page.
The File Tabs drawing previews allow you to quickly change between open drawings. If you hover your mouse over any open File Tab, a preview of the Model and the Layout tabs are displayed. You can click on any of the previews to take you to that particular open drawing or view.
If an asterisk is displayed on a File Tab it means that particular drawing has not been saved since it was last modified. The asterisk will disappear when the drawing has been saved.
After starting a new drawing, it is best practice to save it immediately. Learning how to save a drawing correctly is almost more important than making the drawing. If you can’t save correctly, you will lose the drawing and hours of work.
There are 2 commands for saving a drawing: Save and Save As. I prefer to use Save As.
The Save As command always pauses to allow you to choose where you want to store the file and what name to assign to the file. This may seem like a small thing, but it has saved me many times from saving a drawing on top of another drawing by mistake.
The Save command will automatically save the file either back to where you retrieved it or where you last saved a previous drawing. Neither may be the correct destination. And may replace a file with the same name. So play it safe, use Save As for now.
1.Select the Save as command using one of the following:
| Quick Access Toolbar = |
|
| orApplication Menu = Save As / DrawingorKeyboard = SA <enter> Save as |
AUTOMATIC SAVE
AUTOMATIC SAVE
If you turn the automatic save option ON, your drawing is saved at specified time intervals. These temporary files are automatically deleted when a drawing closes normally. The default save time is every 10 minutes. You may change the save time Intervals and where you would prefer the Automatic Save files to be saved.
How to change the Automatic Save location
1.Type options <enter>
2.Select the Files tab.
3.Locate the Automatic Save File Location and click on the “+” to display