My Life and Work. Генри Форд
watches I worked nights at repairing in a jewelry shop. At one period of those early days I think that I must have had fully three hundred watches. I thought that I could build a serviceable watch for around thirty cents and nearly started in the business. But I did not because I figured out that watches were not universal necessities, and therefore people generally would not buy them. Just how I reached that surprising conclusion I am unable to state. I did not like the ordinary jewelry and watch making work excepting where the job was hard to do. Even then I wanted to make something in quantity. It was just about the time when the standard railroad time was being arranged. We had formerly been on sun time and for quite a while, just as in our present daylight-saving days, the railroad time differed from the local time. That bothered me a good deal and so I succeeded in making a watch that kept both times. It had two dials and it was quite a curiosity in the neighbourhood.
In 1879—that is, about four years after I first saw that Nichols-Shepard machine—I managed to get a chance to run one and when my apprenticeship was over I worked with a local representative of the Westinghouse Company of Schenectady as an expert in the setting up and repair of their road engines. The engine they put out was much the same as the Nichols-Shepard engine excepting that the engine was up in front, the boiler in the rear, and the power was applied to the back wheels by a belt. They could make twelve miles an hour on the road even though the self-propelling feature was only an incident of the construction. They were sometimes used as tractors to pull heavy loads and, if the owner also happened to be in the threshing-machine business, he hitched his threshing machine and other paraphernalia to the engine in moving from farm to farm. What bothered me was the weight and the cost. They weighed a couple of tons and were far too expensive to be owned by other than a farmer with a great deal of land. They were mostly employed by people who went into threshing as a business or who had sawmills or some other line that required portable power.
Even before that time I had the idea of making some kind of a light steam car that would take the place of horses—more especially, however, as a tractor to attend to the excessively hard labour of ploughing. It occurred to me, as I remember somewhat vaguely, that precisely the same idea might be applied to a carriage or a wagon on the road. A horseless carriage was a common idea. People had been talking about carriages without horses for many years back—in fact, ever since the steam engine was invented—but the idea of the carriage at first did not seem so practical to me as the idea of an engine to do the harder farm work, and of all the work on the farm ploughing was the hardest. Our roads were poor and we had not the habit of getting around. One of the most remarkable features of the automobile on the farm is the way that it has broadened the farmer's life. We simply took for granted that unless the errand were urgent we would not go to town, and I think we rarely made more than a trip a week. In bad weather we did not go even that often.
Being a full-fledged machinist and with a very fair workshop on the farm it was not difficult for me to build a steam wagon or tractor. In the building of it came the idea that perhaps it might be made for road use. I felt perfectly certain that horses, considering all the bother of attending them and the expense of feeding, did not earn their keep. The obvious thing to do was to design and build a steam engine that would be light enough to run an ordinary wagon or to pull a plough. I thought it more important first to develop the tractor. To lift farm drudgery off flesh and blood and lay it on steel and motors has been my most constant ambition. It was circumstances that took me first into the actual manufacture of road cars. I found eventually that people were more interested in something that would travel on the road than in something that would do the work on the farms. In fact, I doubt that the light farm tractor could have been introduced on the farm had not the farmer had his eyes opened slowly but surely by the automobile. But that is getting ahead of the story. I thought the farmer would be more interested in the tractor.
I built a steam car that ran. It had a kerosene-heated boiler and it developed plenty of power and a neat control—which is so easy with a steam throttle. But the boiler was dangerous. To get the requisite power without too big and heavy a power plant required that the engine work under high pressure; sitting on a high-pressure steam boiler is not altogether pleasant. To make it even reasonably safe required an excess of weight that nullified the economy of the high pressure. For two years I kept experimenting with various sorts of boilers—the engine and control problems were simple enough—and then I definitely abandoned the whole idea of running a road vehicle by steam. I knew that in England they had what amounted to locomotives running on the roads hauling lines of trailers and also there was no difficulty in designing a big steam tractor for use on a large farm. But ours were not then English roads; they would have stalled or racked to pieces the strongest and heaviest road tractor. And anyway the manufacturing of a big tractor which only a few wealthy farmers could buy did not seem to me worth while.
But I did not give up the idea of a horseless carriage. The work with the Westinghouse representative only served to confirm the opinion I had formed that steam was not suitable for light vehicles. That is why I stayed only a year with that company. There was nothing more that the big steam tractors and engines could teach me and I did not want to waste time on something that would lead nowhere. A few years before—it was while I was an apprentice—I read in the World of Science, an English publication, of the "silent gas engine" which was then coming out in England. I think it was the Otto engine. It ran with illuminating gas, had a single large cylinder, and the power impulses being thus intermittent required an extremely heavy fly-wheel. As far as weight was concerned it gave nothing like the power per pound of metal that a steam engine gave, and the use of illuminating gas seemed to dismiss it as even a possibility for road use. It was interesting to me only as all machinery was interesting. I followed in the English and American magazines which we got in the shop the development of the engine and most particularly the hints of the possible replacement of the illuminating gas fuel by a gas formed by the vaporization of gasoline. The idea of gas engines was by no means new, but this was the first time that a really serious effort had been made to put them on the market. They were received with interest rather than enthusiasm and I do not recall any one who thought that the internal combustion engine could ever have more than a limited use. All the wise people demonstrated conclusively that the engine could not compete with steam. They never thought that it might carve out a career for itself. That is the way with wise people—they are so wise and practical that they always know to a dot just why something cannot be done; they always know the limitations. That is why I never employ an expert in full bloom. If ever I wanted to kill opposition by unfair means I would endow the opposition with experts. They would have so much good advice that I could be sure they would do little work.
The gas engine interested me and I followed its progress, but only from curiosity, until about 1885 or 1886 when, the steam engine being discarded as the motive power for the carriage that I intended some day to build, I had to look around for another sort of motive power. In 1885 I repaired an Otto engine at the Eagle Iron Works in Detroit. No one in town knew anything about them. There was a rumour that I did and, although I had never before been in contact with one, I undertook and carried through the job. That gave me a chance to study the new engine at first hand and in 1887 I built one on the Otto four-cycle model just to see if I understood the principles. "Four cycle" means that the piston traverses the cylinder four times to get one power impulse. The first stroke draws in the gas, the second compresses it, the third is the explosion or power stroke, while the fourth stroke exhausts the waste gas. The little model worked well enough; it had a one-inch bore and a three-inch stroke, operated with gasoline, and while it did not develop much power, it was slightly lighter in proportion than the engines being offered commercially. I gave it away later to a young man who wanted it for something or other and whose name I have forgotten; it was eventually destroyed. That was the beginning of the work with the internal combustion engine.
I was then on the farm to which I had returned, more because I wanted to experiment than because I wanted to farm, and, now being an all-around machinist, I had a first-class workshop to replace the toy shop of earlier days. My father offered me forty acres of timber land, provided I gave up being a machinist. I agreed in a provisional way, for cutting the timber gave me a chance to get married. I fitted out a sawmill and a portable engine and started to cut out and saw up the timber on the tract. Some of the first of that lumber went into a cottage on my new farm and in it we began our married life. It was not a big house—thirty-one feet square and only