Canon EOS Rebel T8i/850D For Dummies. Julie Adair King

       Check the areas labeled in Figure 1-26 to view the battery status. The symbol shown in the figure represents a full battery.

       The number of shots remaining or the available movie recording time appears next to the battery symbol. Again, Figure 1-26 shows you where to look.

       The number just to the right of the shots-remaining value is the burst value. I explain this value in the earlier section, “Decoding viewfinder data,” but here’s a refresher: When you’re using the camera’s continuous-shooting mode, the burst value shows how many consecutive frames you can click off before the camera needs to take a breather. Just to make things confusing, the highest value that can appear in the viewfinder is 9 because only one digit was accommodated in that display. The Live View display, on the other hand, has room for additional digits, which is why the burst value in Figure 1-26 is 98. It’s not because you can capture a larger burst in Live View mode; it’s simply a matter of screen space available for the data to be displayed. See Chapter 2 for more information about shooting continuous bursts of photos and don’t give the burst value in either display no more never-mind.

       You can’t display the electronic level when the camera is set to the default AF Method setting (Face+Tracking). To display the level, you must switch to another AF Method setting. (Chapter 5 has details.) Unfortunately, you can’t make the shift when the Mode dial is set to Scene Intelligent Auto. No AF Method choices or electronic level for you! If you like having a level available at all times and don’t want to fiddle with the electronic version, you can buy tiny bubble levels that slide into the camera’s flash hot shoe. A basic model costs about $15; make sure to buy one that is sized to fit a Canon flash mount. Vello is one popular brand (www.vellogear.com).

       The chart that appears in the histogram display (lower-left screen in Figure 1-27) is a tool you can use to gauge exposure. See the Chapter 9 discussion on interpreting a histogram to find out how to make sense of what you see. But note that when you use flash, the histogram is dimmed. The histogram can’t display accurate information because the final exposure will include light from the flash and not just the ambient lighting. In addition, the histogram dims when you use M (Manual) exposure mode and set the shutter speed to Bulb, which keeps the shutter open for as long as you hold down the shutter button. The camera can’t predict how long you’re going to hold that button down, so it can’t create a histogram that will reflect your final exposure.

       Also note the Exposure Simulation symbol (Exp. SIM) that appears in the second and third displays in Figure 1-27. (Look in the lower-right corner of the frame.) This symbol indicates whether the monitor is simulating the actual exposure that you’ll record. If the symbol blinks or is dimmed, the camera can’t provide an accurate exposure preview, which can occur if the ambient light is either very bright or very dim. Exposure Simulation is also disabled when you use flash.

       Light that enters the viewfinder can affect exposure. For this reason, it’s a good idea to cover the viewfinder while you’re shooting. Canon used to supply a viewfinder cover that was stored on the camera strap, but no more. I trust you can figure out a suitable alternative, although my guess is that you won’t experience any issues unless you’re shooting really long exposures.

       Using Live View or Movie mode for an extended period can harm your pictures and the camera. Using the monitor full-time causes the camera’s innards to heat up more than usual, and that extra heat can create the right conditions for noise, a defect that looks like speckles of sand. More critically, the increased temperatures can damage the camera.

       A white thermometer symbol appears on the monitor to warn you when the camera is getting too hot. If you keep shooting and the temperature continues to increase, the symbol turns red and blinks, alerting you that the camera soon will shut off automatically.

       Aiming the lens at the sun or other bright lights also can damage the camera. Of course, you can cause problems doing this even during normal viewfinder shooting, but the possibilities increase when you use Live View and Movie modes.

       Live View and Movie mode put additional strain on the camera battery. Extra juice is needed to power the monitor for extended periods of time. If you do a lot of Live View or movie shooting, you may want to invest in a second battery so you have a spare on hand when the first one runs out of gas.