The Art of Bookbinding: A practical treatise, with plates and diagrams. Joseph William Zaehnsdorf
href="#fb3_img_img_969d5abc-8189-53c6-ac14-7ff191d146c6.jpg" alt=""/>
Ordinary sewing. 2 sheets on 3 bands.
Ordinary sewing. 2 sheets on 5 bands.
The thick lines shewing the direction of the thread.
The first and last sections are overcast usually with cotton or very fine thread. The first sheet is now to be laid against the bands, and the needle introduced through the kettle stitch hole on the right of the book, which is the |25| head. The left hand being within the centre of the sheet, the needle is taken with it, and thrust out on the left of the mark made for the first band; the needle being taken with the right hand, is again introduced on the right of the same band, thus making a complete circle round it. This is repeated with each band in succession, and the needle brought out of the kettle stitch hole on the left or tail of the sheet. A new sheet is now placed on the top, and treated in a similar way, by introducing the needle at the left end or tail; and when taken out at the right end or top, the thread must be fastened by a knot to the end, hanging from the first sheet, which is left long enough for the purpose. A third sheet having been sewn in like manner,2 the needle must be brought out at the kettle stitch, thrust between the two sheets first sewn, and drawn round the thread, thus fastening each sheet to its neighbour by a kind of chain stitch. I believe the term “kettle stitch” is only a corruption of “catch-up stitch,” as it catches each section as sewn in succession. This class of work must be done very neatly and evenly, but it is easily done with a little practice and patience. This is the strongest sewing executed at the present day, but it is very seldom done, as it takes three or four times as long as the ordinary sewing. The thread must be drawn tightly each time it is passed round the band, and at the end properly fastened off at the kettle stitch, or the sections will work loose in course of time. Old books were always sewn in this manner, and when two or double bands were used, the thread was twisted twice round one on sewing one section, and twice round the other on sewing the next, or once round each cord. In some cases even the “head-band” was worked at |27| the same time, by fastening other pieces of leather for the head and tail, and making it the catch-up stitch as well. When the head-band was worked in sewing, the book was, of course, not afterwards cut at the edges. When this was done, wooden boards were used instead of mill boards, and twisted leather instead of cord, and when the book was covered, a groove was made between each double band. This way is still imitated by sticking a second band or cord alongside the one made in sewing, before the book is covered. The cord for flexible work is called a “flexible cord,” and is twisted tighter and is stronger than any other. In all kinds of sewing I advise the use of Hayes’ Royal Irish thread, not because there is no other of good manufacture, but because I have tried several kinds, and Hayes’ has proved to be the best. The thickness of the cord must always be in proportion to the size and thickness of the book, and the thickness of the thread must depend on the sheets, whether they be half sheets or whole sheets. If too thick a thread is used, the swelling (the rising caused in the back by the thread) will be too much, and it will be impossible to make a proper rounding or get a right size “groove” in backing. If the sections are thick or few, a thick thread must be used to give the thickness necessary to produce a good groove.
[2] As each thread is terminated, another must be joined thereto, so that one length of thread is, as it were, used for a book. The knots must be made very neatly, and the ends cut off, or they will be visible in the sheet by their bulk.
Flexible sewing.
If the book is of moderate thickness, the sections may be knocked down by occasionally tapping them with a piece |28| of wood loaded at one end with lead, or a thick folding-stick may be used as a substitute. I must again call particular attention to the kettle stitch. The thread must not be drawn too tight in making the chain, or the thread will break in backing; but still a proper tension must be kept or the sheets will wear loose. The last sheet should be fastened with a double knot round the kettle stitch two or three sections down, and that section must be sewn all along. The next style of sewing, and most generally used throughout the trade, is the ordinary method.
Ordinary Sewing is somewhat different, inasmuch as the thread is not twisted round the cord, as in flexible work, when the cord is outside the section. In this method the cord fits into the saw cuts. The thread is simply passed over the cord, not round it, otherwise the principle of sewing is the same, that is, the thread is passed right along the section, out of the holes made, and into them again; the kettle stitch being made in the same way. This style of work has one advantage over flexible work, because the back of the book can be better gilt. In flexible work, the leather is attached with paste to the back, and is flexed, and bent, each time the book is opened, and there is great risk of the gold splitting away or being detached from the leather in wear. Books sewn in the ordinary method are made with a hollow or loose back, and when the book is opened, the crease in the back is independent of the leather covering; the lining of the back only is creased, and the leather keeps its perfect form, by reason of the lining giving it a spring outwards. Morocco is generally used for flexible work; calf, being without a grain, is not suitable, as it would show all the creases in the back made by the opening. This class of sewing is excellent for books that do not require so much strength, such as library bindings,3 but for a dictionary or the like, where constant |29| reference or daily use is required, I should sew a book flexibly. Some binders sew their books in the ordinary way, and paste the leather directly to the back, and thus pass it for flexible work; but I do not think any respectable house would do so. A book that has been sewed flexibly will not have any saw cut in the back, so that on examination, by opening it wide, it will at once be seen if it is a real flexible binding or not.
[3] This is not to be confounded with public library bindings.
Intelligence must, however, be used; a book that has already been cased (or bound and sewn on cords) must of necessity have the saw cuts or holes, and such a book would show the cuts.
There is another mode called “flexible not to show.” The book is marked up in the usual way as for flexible, and is also slightly scratched on the band marks with the saw; but not deep enough to go through the sections. A thin cord is then taken doubled for each band, and the book is sewn the ordinary flexible way; the cord is knocked into the back in forwarding, and the leather may be stuck on a hollow back with bands, or it may be fastened to the back itself without bands.4
[4] See chapter on Lining up.
However simple it may appear in description to sew a book, it requires great judgment to keep down the swelling of the book to the proper amount necessary to form a good backing groove and no more. In order to do this, the sheets must from time to time be gently tapped down with a piece of wood or a heavy folding-stick, and great care must be observed to avoid drawing the fastening of the kettle stitch too tight, or the head and tail of the book will be thinner than the middle; this fault once committed has no remedy.
If the sections are very thin, or in half sheets, they may, if the book is very thick, be sewn “two sheets on.” The needle is passed from the kettle stitch to the first band of |30| the first sheet and out, then another sheet is placed on the top, and the needle inserted at the first band and brought out at band No. 2, the needle is again inserted in the first sheet and in at the second band and out at No. 3, thus treating the two sections as one; in this way it is obvious that only half as much thread will be in the back. With regard to books that have had the heads cut, it will be necessary to open each sheet carefully up to the back