Beeton's Book of Needlework. Mrs. Beeton

Beeton's Book of Needlework - Mrs. Beeton


Скачать книгу
of 8 double, 1 purl, 8 double; turn the work and make another circle consisting of 2 double, 9 times alternately 1 purl, 2 double; then fasten this circle on to the preceding one, where it has been joined into a circle, so that both circles meet as seen in illustration. After having turned the work again, work 9 double over the cotton on the 2nd shuttle, which form a scallop between the circles, and repeat from *. The lace is then sewn round the edge of the muslin.

      61.--Rosette in Tatting and Embroidery.

      Materials: Messrs. Walter Evans and Co.'s tatting cotton No. 60, or No. 40 if desired in a larger size.

Rosette in Tatting and Embroidery.

      This rosette is suitable for ornamenting lingeries, cravats, &c.c. It is worked in white embroidery and lace stitch, and edged all round with a tatted lace. For the latter work with very fine cotton * 1 large circle, consisting of 5 double, 1 purl, 7 times alternately 2 double, 1 purl, then 5 double. At a short distance from this circle work a smaller one, consisting of 5 double fastened on to the last purl of the large circle, 5 double. Leave again an interval as small as the last, and repeat from [76] * 11 times more. But in working the large circles, instead of working the 1st purl, fasten them on the same purl of the large circle on which the small circle has been fastened; besides this, in working the last (12th) large circle, instead of working the last purl, fasten it on the 1st purl of the 1st circle; the last small circle is fastened on to the same purl. The lace is thus joined into a circle, and is sewn round the outside of the rosette with button-hole stitches.

Cravat End in Tatting

      62--Cravat End in Tatting.

      Materials: Messrs. Walter Evans and Co.'s tatting cotton No. 60; tatting-pin No. 3.

      The illustration shows the end of a tatted cravat. Work first the middle row of the cravat at the same time with the row of circles on the left side of the middle row in illustration; begin with the first circle of [77] the middle row. It consists of 7 times alternately 3 double, 1 small purl, then 3 double. Work close to this circle, which must be turned downwards, a Josephine knot, consisting of 5 plain stitches, then a circle consisting of 5 double, 1 purl one-fifth of an inch long, 5 times alternately 3 double, 1 small purl; 3 double, 1 long purl, 5 double. *Turn this circle (which is the first of the side row) downwards, work close to it a Josephine knot, then a circle consisting of 12 double, 1 small purl, 12 double. Turn this circle downwards, work a Josephine knot, and then again a circle like the first of the side row, but instead of working the first long purl, fasten it on to the last purl of the preceding circle of the same row. Then hold the work so that the circles of the side row are turned downwards, work a Josephine knot, 1 circle like the first circle of the middle row, turn the work, make 1 Josephine knot, and then a circle like the second circle of the side row. Repeat from * till the cravat is sufficiently long. The last circle of the middle row must correspond to the first circle of the same row. Then begin to work the lower edge at the same time with the last circle of the middle row, * 1 Josephine knot, then a circle like the circles of the side row, again 1 Josephine knot, fastened on to the next purl of the last circle of the middle row; repeat 3 times more from *. Then continue as before, and work on the right side of the middle row a row of circles exactly like those which have been worked at the same time with those of the middle row.

      The fastening on of the cotton between two Josephine knots is seen in illustration. The circles at the other end of the cravat are fastened like those of the first-described end. The cravat is edged all round with a row of circles with Josephine knots worked exactly like those of the preceding row, and the manner of fastening which is seen in the illustration.

       [78]

      63.--Rosette in Tatting and Embroidery.

      Materials: Messrs. Walter Evans and Co.'s tatting cotton No. 60, or 40 if required larger; tatting-pin No. 3.

Rosette in Tatting and Embroidery.

      The centre of this rosette is worked in lace stitch on muslin, edged round with button-hole stitch and trimmed with a tatted lace, which is worked at the same time with the centre. Work first * a small circle consisting of 5 double, 1 purl, 3 double, fastened on to the button-hole stitch edging of the rosette, then 3 double, 1 purl, 5 double. Then turn the just-completed circle downwards, and afterwards work at a short distance a large circle consisting of 7 double, 6 times alternately 1 purl, 2 double, lastly 1 purl, 7 double, then 1 Josephine knot consisting of 7 plain. Then turn the work again, so that the last large circle is turned downwards, and repeat from * 12 times more; the large and small circles must be fastened on to one another, as seen in illustration. The fastening of the small circles on to the centre is likewise done from the illustration.

      [79]

      64.--Cravat End in Tatting and Darned Netting.

      Materials: Messrs. Walter Evans and Co.'s tatting cotton No. 50; tatting-pin No. 3; square of netting; fine Mecklenburg thread No. 80.

Cravat End in Tatting and Darned Netting.

      The end of this cravat is ornamented with a square of darned netting, edged with a tatted border, and sewn on to the material of the cravat. But the diamond in tatting (page 18), or the square (page 31) will look [80] very pretty with this border. The square is worked in diamond netting, and has seven holes in length and breadth. They are darned in linen stitch, darning stitch, and point d'esprit, with Mecklenburg thread. The ground is worked over a mesh measuring three-tenths of an inch round. For each square one more row than is needed must be worked, and the cast-on stitches are cut off, as they are longer than the stitches of the other rows. The tatted border is worked with fine tatting cotton. Fasten the cotton at one corner of the square and work * a circle consisting of 7 double, 1 purl, then six times alternately 2 double, 1 purl, 7 double, fasten the cotton on to the same stitch of the ground where it was first fastened; #work a second circle like the first, but fasten it, instead of working the first purl on to the last purl of the preceding circle; fasten the cotton again on to the same stitch, then on to the next stitch, and work a small circle, consisting of 5 double fastened on to the last purl of the preceding circle, 4 double, 1 purl, 5 double. The cotton is fastened on to the same netted stitch as before, and then on to the next stitch; repeat twice more from #, and then repeat from * in all three times more, so that the square is edged all round. It is sewn into the material from the illustration.

      65.--Tatted Antimacassar. (See pages 574–5).

      Materials: Messrs. Walter Evans and Co.'s Boar's Head cotton No. 30, or tatting cotton No. 24, or for a larger size tatting cotton No. 20; tatting-pin No. 1; large shuttle.

      The illustration shows the fourth of the antimacassar and the whole of the rosette which forms the centre. Begin with the latter, with the five-branched pattern in the centre, at the same time with the following round of circles:--*Work first one circle of this round, consisting of 3 double, 1 purl, 4 times alternately 2 double, 1 purl, 3 double; then at [81] a short distance a circle like the one just made, in which, however, instead of working the first purl, the cotton must be joined on to the last purl of the preceding circle. Then work at a short distance the first leaf of the five-branched pattern, which consists of 4 double, 1 purl, 4 double. When this branch is completed, repeat at a short distance 4 times more from *; but in working the branches of the five-branched pattern, instead of working the purl, join it on to the purl of the first branch of the five-branched pattern (this purl forms the centre of the pattern). All the circles must also be joined one to each other, as can be seen from illustration. Then work the scallops round the border of the rosette, * fasten the cotton on to the purl which joins the two next circles of the preceding round, and work one scallop consisting of 11 times alternately 2 double, 1 purl, then 2 double. Repeat 9 times more from *. When the rosette is completed, work eight


Скачать книгу