Carving Small Characters in Wood. Renee Mery
and make a vertical stitch to keep the floss in place. The fly stitch can be embroidered using isolated stitches.
It is embroidered like the previous one, but these stitches overlap at the top.
Embroider the first row of sufficiently spaced, small stitches in order to embroider a second row of longer stitches above.
Embroider a first row of small fly stitches spaced at regular intervals, then embroider a second row of similar stitches above these.
Embroider a first row of close, long, oblique stitches from left to right, then a second, from right to left, while stitching in the same hole.
First embroider a central, long stitch. To make the shape of a fan, embroider the two outer points and then the two intermediary points.
Starting from the same central points, embroider the eight branches of the star using turning stitches. The horizontal and vertical stitches are the same-length, oblique stitches midway between the previous ones.
Long stitches of the same length, embroidered two by two, give the shape of a four-petal flower.
To cover the entire surface, stitch very close, vertical long stitches, in a left-to-right direction, from one edge of the pattern to the other.
To save floss, embroider a long stitch from left to right. Take out the needle just below, making a small, vertical stitch. Embroider the long stitch continuing from right to left, and take the needle out just below.
The stitches are closer on the inner part of the ring than on the outer part.
The long, vertical stitches, embroidered from one edge of the pattern to the other, will reduce the length along the diagonal angle. Horizontal long stitches, stitched in the same holes, will progressively increase the length.
This is done in two steps. First embroider two rows (or more, depending on the width) with staggered running stitches. Then, in a left-to-right direction, embroider above them using very close vertical long stitches.
This is also accomplished in two steps. First embroider a single row of lockstitches, then above that stitch a row of small, tight, vertical long stitches.
Embroider four big, long stitches in the shape of a star in the center of the pattern. Shape the outer circle using running stitches then cover the entire surface in tight long stitches or by stitching along the outline.
Embroider the pattern in satin stitch. With a different color floss, embroider the overlocking stitches above as closely as possible.
Embroider a first row of long stitches following the contours of the pattern. In the subsequent rows, push the needle through the floss of the upper rows.
Embroider a first long, vertical stitch at the top. Stitch from one edge to the other, then cover the entire pattern in slanted long stitches that cross in the middle.
Cover the surface of the pattern in rows of alternating long and short stitches, overlapping one row over the other. Embroider from left to right then from right to left.
All the stitches have the same length, and one row overlaps the other.
Starting from a central point, embroider an odd number of long stitches of the same length. Bring the needle out through the center then alternately enter above and below the long stitches to fill them completely. Insert the needle upside down to stop the floss.
Embroider the long horizontal and vertical stitches, which must be the same length, in the shape of the grid pattern.
This is worked in two steps. First, embroider two rows of regularly spaced, alternating running stitches, the visible part longer than the hidden part. Then connect the rows with long stitches from one to the other.
Embroider the blocks alternating the horizontal and vertical stitches.
Creation No. 1
Landscape shirt
Practice long stitches
STITCH USED
Long stitches (see lesson on page)
SUPPLIES
× DMC milled cotton floss: 1 skein each of colors 3812, 3755, 322, 312
× Erasable fabric marker
× Embroidery needle
× 1 shirt
INSTRUCTIONS
Trace the enlarged pattern with an erasable fabric marker onto the back yoke of the shirt. Embroider with a pointed needle, DMC milled cotton floss, two strands each of green 3812, sky blue 3755, medium blue 322, and dark blue 312.
Work the scenery with long stitches varying their lengths. Avoid leaving any floating threads between the patterns, as they appear transparent on light fabric.