The Gun Digest Book of Combat Handgunnery. Massad Ayoob
Digest shows it is also the most influential. It seems that every year brings at least another 1911 “clone” to the marketplace.
Little has changed in the pistol’s core design, but many subtle evolutions have taken place. The first wave came after WWI, when the American military began a study of how small arms had performed in the most recent conflict. The study was rather leisurely, it appears, as the list of complaints wasn’t announced until about 1923. About half of the doughboys thought the trigger of the 1911 was too long. Many said the grip tang bit their hands. Most found the front sight post and rear notch so tiny as to be useless. It was also noted that when soldiers missed with it, they generally hit low.
About 1927, answers to these concerns were implemented, creating the 1911-A1 model. The grip tang was lengthened to prevent bite to the web of the hand. The trigger was shortened dramatically, and the frame at the rear of the trigger guard was niched out on both sides to further enhance finger reach. Believing that the low hits were a function of the pistol “pointing low” as opposed to the operators jerking their triggers, the designers gave the A1 an arched mainspring housing that sort of levered the muzzle upward and made the gun “point higher.” Finally, a slightly better and more visible set of fixed sights was mounted to the pistol.
The 1911’s ergonomics are timeless. The author used this 1991-A1 Colt tuned by Mark Morris to place 2nd Master in the 2001 New England Regional IDPA Championships.
Gun companies and steel foundries were also making advances in metallurgy. It is generally accepted today that early 1911s are made of much softer steel than the 1911-A1 and later commercial Colts. This is why pistolsmiths have historically recommended against tuning early guns for accuracy. They felt the soft steel would not “hold” the fine tolerances required in precision accurizing, a process that became popular among target shooters in the 1930s and has remained a cottage industry within the gunsmithing business ever since.
The 1950s brought the epoch of Jeff Cooper who, writing in Guns & Ammo magazine, almost single-handedly re-popularized the 1911. Its one-third firepower advantage over the revolver, eight shots to six, plus its rapid reloading was but one advantage. The short, easy trigger pull – particularly when the gun had been worked on – delivered better hit potential under stress than the long, heavy pull of a double-action revolver. Though it appeared large, the Colt auto was flat in profile and easy to conceal, particularly inside the waistband.
The resurgence of the 1911’s popularity had begun. By the 1970s, copycat makers were coming out of the woodwork. Through the 1980s, it at last occurred to makers to furnish the guns at the factory with the accoutrements that were keeping a host of custom pistolsmiths in business. These included wide grip safeties to cushion recoil, with a recurve to guide the hand into position and speed the draw, and a “speed bump” at the bottom edge to guarantee depression of the grip safety even with a sloppy hold. This part was also available “cut high” to allow the hand to get even higher on the grip. A low bore axis had always been one reason the pistol felt so good in the hand and was easily controlled in rapid fire by someone who knew the right techniques. Now, even the folks at the Colt factory began relieving the lower rear of the trigger guard, in hopes that the hand could ride still higher for even better performance. Now too, at last, 1911s were coming out of the factories with heavy-duty fixed sights that offered big, highly visible sight pictures.
There were also high-capacity versions, first with metal frames and then with polymer. Once, it had been standard procedure to send your Colt to a gunsmith to have it “throated” to feed hollowpoints and semi-wadcutters; now, Colt and Springfield Armory and Kimber and many more were producing the guns “factory throated.”
Para-Ordnance pioneered the high capacity 1911. The author used this one frequently at the National Tactical Invitational, where its extra firepower (14 rounds total) came in handy.
1911s are capable of awesome accuracy. Springfield Armory TRP Tactical Operator pistol, mounting M3 Illuminator flashlight, put five rounds of Winchester .45 Match into this 1-inch group, hand held with bench rest at 25 yards.
By the dawn of the 21st century, the 1911 still ruled, though Colt did not. Kimber had become the single largest producers of 1911 pistols, offering a variety of sizes and formats. Springfield Armory was close behind in sales and equal in quality. Customized target pistols still ruled the bull’s-eye firing lines, as they had for decades, but now competitors were showing up and winning with factory match 1911s from Les Baer and Rock River. Since the International Practical Shooting Confederation was founded at the Columbia Conference in 1976, the 1911 had ruled that arena, but now the winning gun in IPSC was less often the old Colt than a high-capacity variant like the STI or the Para-Ordnance.
Four top-quality manufacturers and styles of modern 1911s, all .45s. From top: Compact Colt Lightweight CCO. Service Kimber Custom II. Hi-Cap Para-Ordnance P14.45. Tactical Springfield TRP with extended dust cover and M3 light.
Over the years, the 1911 has been produced in a myriad of calibers. The .38 Super 1911s and hot 9mm variants win open class IPSC matches in the third millennium, and fancy inside, ordinary outside 1911s in caliber .40 S&W rule Limited class in that game. The 9mm 1911 is seen as the winning gun in the Enhanced Service Pistol class of the relatively new International Defensive Pistol Association contests, but the .45 caliber 1911 is much more popular, known in IDPA circles as a Custom Defense Pistol. However, in IDPA, even more shooters use Glocks or double-action autos, making the Stock Service Pistol category even more populous than the 1911 categories. The overwhelming majority of 1911s in serious use today are .45 caliber. No one has yet made a more “shootable” pistol in that power range.
Thus, with timeless continuity, the 1911 has outgrown the Colt brand with which it was once synonymous.
The P-35
“Porgy & Bess” opens in New York, and Steinbeck’s “Tortilla Flat” is published. The hot dance is the Rhumba. Milk is up to 23 cents for half a gallon (delivered, of course). Boulder Dam, Alcoholics Anonymous, and the Social Security Act all come into being. It is the birth year for Woody Allen, Elvis Presley, Sandy Coufax, and the Browning Hi-Power pistol. It is 1935.
Colt collectors will spot the WWII-vintage ejection port and sights on “retro” Colt 1911A1, reintroduced in 2001.
The P-35 was the last design of John Browning, who also created the Colt 1911. Many would also consider the Hi-Power his best. Known in some quarters as the GP or grand puissance, the pistol may owe more of its ingenuity to Didionne Souave than to Browning. In any case, it was the first successful high-capacity 9mm semiautomatic, and for more than a quarter of a century was the definitive one. It remains today the standard-issue service pistol of Great Britain and numerous other countries.
For most of its epoch, the P-35 was distinguished by a tiny, mushy-feeling thumb safety and by sights that were not the right size or shape for fast acquisition. In the 1980s Browning fixed that at last with its Mark II and later Mark III series pistols, which reached their high point in the Practical model. Good, big sights…a gun at last throated at the Browning factory to feed hollowpoints…big, positively operating ambidextrous thumb safety…legions of Browning fans were in heaven. That the guns by now were