Carpentry and Woodwork. Edwin W. Foster
sand-paper suggested match scratchers, and as they are useful articles, several designs were worked up for Christmas gifts. Three of these are shown in Fig. 31, but after a good deal of discussion it was decided that for scratching matches a longer space for sand-paper was necessary, and three other designs (Fig. 32) were the result of several hours' work.
Fig. 31. First match scratchers
"I'm getting tired of match scratchers," exclaimed Harry; "let's make some toys!"
Fig. 32. Later designs in match scratchers
"Very well, we'll get ready for Santa Claus, and provide a stock of things for our numerous young cousins," replied Ralph. "This will give us a chance to use our coping saw, and I have been wanting to do that for a long time."
V
TOYS
"In making presents for little children," said Ralph, "we must always remember that the toys will be played with and receive a great deal of rough handling. So to begin with, they must be strong and of simple construction. The youngsters don't care so much for finely finished articles as older people do, and they tire very quickly of things that are so complicated that they get out of order easily. Suppose we first make some neat boxes. They can be filled with candy, and after that is gone they will be used for a long time to keep treasures in."
Fig. 33 shows the drawing of the first box the boys made. The two oblong pieces form the top and bottom. The latter was nailed on with 3⁄8-inch brads. The two cleats were nailed to the under side of the top to hold it in place, while the sides and ends were fastened with a little glue, and one brad in the centre. This made a very serviceable box, the material being basswood 3⁄16 of an inch thick.
Fig. 33. Toy box
The sled shown in Fig. 34 came next, made of the same material as the box. Ralph was delighted with its strength and graceful lines. Two cleats were glued into the grooves in the sides, and the top nailed on with 3⁄8-inch brads.
Fig. 34. The toy sled
In each case the drawing was made directly on the wood, which was sawed close to the lines with the coping saw, and finished to the lines with the knife.
The dog house (Fig. 35) brought out some new features of construction. The opening in front was cut out with the saw and finished as usual. Sides and ends were then put together with glue. The two pieces forming the roof were nailed together with 3⁄8-inch brads, to make a right angle and were then placed in position and nailed to the front and back pieces.
Ralph explained that it was a saving of time and trouble to draw a light pencil line to mark the location of the brads. If this is not done, the brads are apt to come out in the wrong place and will then have to be withdrawn and placed again. This is a waste of time and it very often spoils the looks of the work, so that the drawing of the pencil lines really saves time in the end, and the lines can be erased.
Fig. 35. The dog house
Fig. 36. Indian chief
"We can make any amount of this dolls' furniture," said Ralph. "In fact we could build a doll's house and equip it with chairs, tables, and beds, but what the youngsters really like best is something that works, something that moves, so I move—no pun intended—that we design a toy that has some life to it. We can cut it out with the coping saw and there need not be a great deal of knife work to it. Suppose we make an Indian paddling a canoe!" This was more of a problem than they had bargained for, as it was necessary to look through an encyclopædia to find pictures of canoes, Indians, tomahawks, etc. Harry traced the figure of an Indian chief, transferred it to the surface of a piece of 1⁄8-inch basswood, and on sawing it out found that he had a very good silhouette of an Indian, but it did not move (Fig. 36). The problem was still unsolved, and experiments along that line used up several afternoons.
Fig. 37. Indian paddlers
Fig. 38. Indian paddlers. Separate parts cut out and assembled
What was finally worked out is shown in Fig. 37. The arms were made separate from the body, and were fastened to both the paddles and the bodies by brads, which acted as pivots. The bodies were then fastened to the canoe in the same way, but a little glue was used as well as brads, as they were to be immovable. How to make the paddlers move in unison was a hard problem, finally solved by fastening a narrow strip of wood to the lower part of each paddle. It was found that by moving this strip back and forth the two figures moved with the precision of a machine. In each case where a pivot was required it seemed only necessary to drive in a 3⁄8-inch brad. (Fig. 38.)
The success of this moving toy was so great that the boys went rushing into the house to show it to the family.
Soon they came rushing back again, determined to try their skill on something else. Ralph had to remind Harry that the Indian paddlers were not yet finished, as the toy would not stand up, so the standards shown at b were sawed out, smoothed with the knife, and one fastened at each end, as a support, by means of brads and glue.
Fig. 39. The fencers
After much boyish arguing, it was decided next to try two swordsmen fencing. This called for some posing, and looking in books to get the correct position of a man fencing. The drawing shown in Fig. 39 was finally copied from a book on athletic sports.
The different parts of the figures are shown clearly in the illustration. It was found, by experimenting with paper figures, that by making one leg of each figure in two parts, the body, arms, and other leg could be sawed out of one piece.
The work of cutting out and assembling this combination, seemed much easier now that the boys had gotten into the swing of it, and they were so anxious to see it