Arcot, Morey & Wade (Sci-Fi Classics). John W. Campbell

Arcot, Morey & Wade (Sci-Fi Classics) - John W. Campbell


Скачать книгу
car, we should get tremendous speeds. We'll need no wings, of course, for with a small unit pointed vertically, we'll be able to support the car in the air. It will make possible a machine that will be able to fly in reverse and so come to a quick stop. It will steer us or it will supply us with electrical power, for we merely have to put a series of small metal bars about the circumference of the generator, and get a tremendously powerful engine.

      “For our present need, it means a tremendously powerful engine—and one that we can make invisible.

      “I believe you can guess the source of that breeze we had there? It would make a wonderful air-conditioning unit.”

      “Dick Arcot,” began Morey, his voice tight with suppressed excitement, “I would like to be able to use this invention. I know enough of the economics of the thing, if not its science, to know that the apparatus before us is absolutely invaluable. I couldn't afford to buy the rights on it, but I want to use it if you'll let me. It means a new era in transcontinental air travel!”

      He turned sharply to Fuller. “Fuller, I want you to help Arcot with the ship to chase the Pirate. You'll get the contract to design the new airliners. Hang the cost. It'll run into billions—but there will be no more fuel bills, no oil bills, and the cost of operation will be negligible. Nothing but the Arcot short wave tubes to buy—and each one good for twenty-five thousand hours service!”

      “You'll get the rights on this if you want them, of course,” said Arcot quietly. “You're maintaining these laboratories for me, and your son helped me work it out. But if Fuller can move over here tomorrow, it will help things a lot. Also I'd like to have some of your best mechanics to make the necessary machines, and to start the power units.”

      “It's done,” Morey snapped.

      CHAPTER III

       Table of Contents

      Early the next morning Fuller moved his equipment over to the laboratory and set up his table for work. There Arcot and Morey joined him, and the designing of the new machine was started.

      “First, let's get some idea of the most advisable shape,” Fuller began methodically. “We'll want it streamlined, of course; roughly speaking, a cylinder modified to fit the special uses to which it will be put. But you probably have a general plan in mind, Arcot. Suppose you sketch it for us.”

      The big physicist frowned thoughtfully. “Well, we don't know much about this yet, so we'll have to work it out. You'll have plenty of fun figuring out strains in this machine, so let's be safe and use a factor of safety of five. Let's see what we'll need.

      “In the first place, our machine must be proof against the Pirate's gas, for we won't be riding a beam with instruments to guide us safely, if we pass out. I've thought that over, and I think that the best system is just what we used in the sample bottles—a vacuum. His gas is stopped by nothing, so to speak, but there is no substance that will stop it! It will no doubt penetrate the outer shell, but on reaching the vacuum, it will tend to stay there, between the inner and outer walls. Here it will collect, since it will be fighting air pressure in going either in or out. The pressure inside will force it back, and the pressure outside will force it in. If we did not pump it out, it would soon build up pressure enough to penetrate the interior wall. Now, since the stuff can leak through any material, what kind of a pump shall we use? It won't be pushed by a piston, for it will leak through either the cylinder walls or the piston. A centrifugal pump would be equally ineffective. A mercury vapor pump will take it out, of course, and keep a high vacuum, but we'd never make any progress.

      “Our new machine gives us the answer. With it we can just have a number of openings in the wall of the outer shell, and set in them one of these molecular motion directors, and direct the molecules into the outside air. They can't come in through it, and they will go out!”

      “But,” Morey objected, “the vacuum that keeps out the gas will also keep out heat, as well! Since our generator is to run on heat energy, it will be rather chilly inside if we don't remedy that. Of course, our power units could be placed outside, where the blast of air will warm them, but we really won't have a very good streamline effect if we hang a big electric generator outside.”

      “I've thought of that too,” Arcot answered. “The solution is obvious—if we can't bring the generator to the air, we must bring the air to it.” He began sketching rapidly on the pad before him, “We'll have all the power equipment in this room here in the back, and the control room up in front, here. The relays for controlling will be back here, so we can control electrically the operation of the power equipment from our warm, gas-tight room. If it gets too warm in there, we can cool it by using a little of the heat to help accelerate the ship. If it is too cold, we can turn on an electric heater run by the generator. The air for the generator can come in through a small sort of scoop on top, and leave through a small opening in the rear. The vacuum at the tail will assure us a very rapid circulation, even if the centrifugal pump action of the enclosed generator isn't enough.”

      His thoughts began moving more rapidly than his words. “We'll want the generator greatly over power to run tests over a greater range. Won't need more than one hundred kilowatts altogether, but should install about a thousand—A.C., of course. Batteries in the keel for starting the generator.... Self-supporting when it's rolling....

      “But let's set down some actual figures on this.”

      For the rest of the day the three men were working on the general plan of the new ship, calculating the strengths needed, supplementing mathematics with actual experiments with the machines on hand. The calculating machines were busy continuously, for there were few rules that experience could give them. They were developing something entirely new, and though they were a designing staff of three of the foremost mathematicians in the world, it was a problem that tested their ingenuity to the utmost.

      By the evening of the first day, however, they had been able to give the finished designs for the power units to the mechanics who were to make them. The order for the storage battery and the standard electrical equipment had been placed at once. By the time they had completed the drawings for the mail casting, the materials were already being assembled in a little private camp that Morey owned, up in the hills of Vermont. The giant freight helicopters could land readily in the wide field that had been cleared on the small plateau, in the center of which nestled a little blue lake and a winding trout brook.

      The mechanics and electrical engineers had been sent up there already—officially on vacation. The entire program could be carried out without attracting the least attention, for such orders from the great Transcontinental lines were so frequent that no importance was attached to them.

      Four days after the final plans had been completed the last of the supplies were being assembled in the portable metal shed that was to house the completed machine. The shining tungsto-steel alloy frame members were rapidly being welded in place by cathode ray welding torches in the hands of skilled artisans.

      Already at the other end of the shop the generator had been arranged for use with the molecular motion power units. The many power units to drive and support the ship were finished and awaiting installation as the crew quit work on the fourth evening. They would be installed on the frame in the morning, and the generator would be hoisted into place with the small portable crane. The storage batteries were connected, and in place in the hull. The great fused quartz windows rested in their cases along one wall, awaiting the complete application of the steel alloy plates. They were to be over an inch thick, an unnecessary thickness, perhaps, but they had no need to economize weight, as witnessed by their choice of steel instead of light metal alloys throughout the construction.

      The three men had arrived late that afternoon in a small helicopter, and had gone directly to the shops to see what progress had been made. They had been forced to remain in New York to superintend the shipment of the necessary supplies to the camp site, and since no trouble was anticipated in the making of the steel framework, they had not felt it necessary to come. But now they would be needed to superintend the more delicate


Скачать книгу