The Economy of Workshop Manipulation. John Richards
that manipulative processes can be so generalised—this would be impossible; yet much can be done, and many things regarded as matters of special knowledge can be presented in a way to come within principles, and thus rendered capable of logical investigation.
Writers on mechanical subjects, as a rule, have only theoretical knowledge, and consequently seldom deal with workshop processes. Practical engineers who have passed through a successful experience and gained that knowledge which is most difficult for apprentices to acquire, have generally neither inclination nor incentives to write books. The changes in manipulation are so frequent, and the operations so diversified, that practical men have a dread of the criticisms which such changes and the differences of opinion may bring forth; to this may be added, that to become a practical mechanical engineer consumes too great a share of one's life to leave time for other qualifications required in preparing books. For these reasons "manipulation" has been neglected, and for the same reasons must be imperfectly treated here. The purpose is not so much to instruct in shop processes as to point out how they can be best learned, the reader for the most part exercising his own judgment and reasoning powers. It will be attempted to point out how each simple operation is governed by some general principle, and how from such operations, by tracing out the principle which lies at the bottom, it is possible to deduce logical conclusions as to what is right or wrong, expedient or inexpedient. In this way, it is thought, can be established a closer connection between theory and practice, and a learner be brought to realise that he has only his reasoning powers to rely on; that formulæ, rules, tables, and even books, are only aids to this reasoning power, which alone can master and combine the symbol and the substance.
No computations, drawings, or demonstrations of any kind will be employed to relieve the mind of the reader from the care of remembering and a dependence on his own exertions. Drawings, constants, formulæ, tables, rules, with all that pertains to computation in mechanics, are already furnished in many excellent books, which leave nothing to be added, and such books can be studied at the same time with what is presented here.
The book has been prepared with a full knowledge of the fact, that what an apprentice may learn, as well as the time that is consumed in learning, are both measured by the personal interest felt in the subject studied, and that such a personal interest on the part of an apprentice is essential to permanent success as an engineer. A general dryness and want of interest must in this, as in all cases, be a characteristic of any writing devoted to mechanical subjects: some of the sections will be open to this charge, no doubt, especially in the first part of the book; but it is trusted that the good sense of the reader will prevent him from passing hurriedly over the first part, to see what is said, at the end, of casting, forging, and fitting, and will cause him to read it as it comes, which will in the end be best for the reader, and certainly but fair to the writer.
CHAPTER I.
PLANS OF STUDYING.
By examining the subject of applied mechanics and shop manipulation, a learner may see that the knowledge to be acquired by apprentices can be divided into two departments, that may be called general and special. General knowledge relating to tools, processes and operations, so far as their construction and action may be understood from general principles, and without special or experimental instruction. Special knowledge is that which is based upon experiment, and can only be acquired by special, as distinguished from general sources.
To make this plainer, the laws of forces, the proportion of parts, strength of material, and so on, are subjects of general knowledge that may be acquired from books, and understood without the aid of an acquaintance with the technical conditions of either the mode of constructing or the manner of operating machines; but how to construct proper patterns for castings, or how the parts of machinery should be moulded, forged, or fitted, is special knowledge, and must have reference to particular cases. The proportions of pulleys, bearings, screws, or other regular details of machinery, may be learned from general rules and principles, but the hand skill that enters into the manufacture of these articles cannot be learned except by observation and experience. The general design, or the disposition of metal in machine-framing, can be to a great extent founded upon rules and constants that have general application; but, as in the case of wheels, the plans of moulding such machine frames are not governed by constant rules or performed in a uniform manner. Patterns of different kinds may be employed; moulds may be made in various ways, and at a greater and less expense; the metal can be mixed to produce a hard or a soft casting, a strong or a weak one; the conditions under which the metal is poured may govern the soundness or shrinkage—things that are determined by special instead of general conditions.
The importance of a beginner learning to divide what he has to learn into these two departments of special and general, has the advantage of giving system to his plans, and pointing out that part of his education which must be acquired in the workshop and by practical experience. The time and opportunities which might be devoted to learning the technical manipulations of a foundry, for instance, would be improperly spent if devoted to metallurgic chemistry, because the latter may be studied apart from practical foundry manipulation, and without the opportunity of observing casting operations.
It may also be remarked that the special knowledge involved in applied mechanics is mainly to be gathered and retained by personal observation and memory, and that this part is the greater one; all the formulæ relating to machine construction may be learned in a shorter time than is required to master and understand the operations which may be performed on an engine lathe. Hence first lessons, learned when the mind is interested and active, should as far as possible include whatever is special; in short, no opportunity of learning special manipulation should be lost. If a wheel pattern come under notice, examine the manure in which it is framed together, the amount of draught, and how it is moulded, as well as to determine whether the teeth have true cycloidal curves.
Once, nearly all mechanical knowledge was of the class termed special, and shop manipulations were governed by empirical rules and the arbitrary opinions of the skilled; an apprentice entered a shop to learn a number of mysterious operations, which could not be defined upon principles, and only understood by special practice and experiment. The arrangement and proportions of mechanism were also determined by the opinions of the skilled, and like the manipulation of the shop, were often hid from the apprentice, and what he carried in his memory at the end of an apprenticeship was all that he had gained. The tendency of this was to elevate those who were the fortunate possessors of a strong natural capacity, and to depress the position of those less fortunate in the matter of mechanical "genius," as it was called. The ability to prepare proper designs, and to succeed in original plans, was attributed to a kind of intuitive faculty of the mind; in short, the mechanic arts were fifty years ago surrounded by a superstition of a different nature, but in its influences the same as superstition in other branches of knowledge.
But now all is changed: natural phenomena have been explained as being but the operation of regular laws; so has mechanical manipulation been explained as consisting in the application of general principles, not yet fully understood, but far enough, so that the apprentice may with a substantial education, good reasoning powers, and determined effort, force his way where once it had to be begged. The amount of special knowledge in mechanical manipulation, that which is irregular and modified by special conditions, is continually growing less as generalisation and improvement go on.
Another matter to be considered is that the engineering apprentice, in estimating what he will have to learn, must not lose sight of the fact that what qualifies an engineer of to-day will fall far short of the standard that another generation will fix, and of that period in which his practice will fall. This I mention because it will have much to do with the conceptions that a learner will form of what he sees around him. To anticipate improvement and change is not only the highest power to which a mechanical engineer can hope to attain, but is the key to his success.
By examining the history of great achievements in the mechanic arts, it will be seen that success has been mainly dependent upon predicting future wants, as well as upon an ability to supply such wants, and that the commercial value