The Economy of Workshop Manipulation. John Richards
improvements is often measured by conditions that the improvements themselves anticipate. The invention of machine-made drills, for example, was but a small matter; but the demand that has grown up since, and because of their existence, has rendered this improvement one of great value. Moulded bearings for shafts were also a trifling improvement when first made, but it has since influenced machine construction in America in a way that has given great importance to the invention.
It is generally useless and injudicious to either expect or to search after radical changes or sweeping improvements in machine manufacture or machine application, but it is important in learning how to construct and apply machinery, that the means of foreseeing what is to come in future should at the same time be considered. The attention of a learner can, for example, be directed to the division of labour, improvements in shop system, how and where commercial interests are influenced by machinery, what countries are likely to develop manufactures, the influence of steam-hammers on forging, the more extended use of steel when cheapened by improved processes for producing it, the division of mechanical industry into special branches, what kind of machinery may become staple, such as shafts, pulleys, wheels, and so on. These things are mentioned at random, to indicate what is meant by looking into the future as well as at the present.
Following this subject of future improvement farther, it may be assumed that an engineer who understands the application and operation of some special machine, the principles that govern its movements, the endurance of the wearing surfaces, the direction and measure of the strains, and who also understands the principles of the distribution of material, arrangement, and proportions—that such an engineer will be able to construct machines, the plans of which will not be materially departed from so long as the nature of the operations to which the machines are applied remain the same.
A proof of this proposition is furnished in the case of standard machine tools for metal-cutting, a class of machinery that for many years past has received the most thorough attention at the hands of our best mechanical engineers.
Standard tools for turning, drilling, planing, boring, and so on, have been changed but little during twenty years past, and are likely to remain quite the same in future. A lathe or a planing-machine made by a first-class establishment twenty years ago has, in many cases, the same capacity, and is worth nearly as much in value at the present time as machine tools of modern construction—a test that more than any other determines their comparative efficiency and the true value of the improvements that have been made. The plans of the framing for machine tools have been altered, and many improvements in details have been added; yet, upon the whole, it is safe to assume, as before said, that standard tools for metal-cutting have reached a state of improvement that precludes any radical changes in future, so long as the operations in metal-cutting remain the same.
This state of improvement which has been reached in machine-tool manufacture, is not only the result of the skill expended on such tools, but because as a notable exception they are the agents of their own production; that is, machine tools produce machine tools, and a maker should certainly become skilled in the construction of implements which he employs continually in his own business. This peculiarity of machine-tool manufactures is often overlooked by engineers, and unfair comparisons made between machines of this class and those directed to wood conversion and other manufacturing processes, which machinists, as a rule, do not understand.
Noting the causes and conditions which have led to this perfection in machine-tool manufacture, and how far they apply in the case of other classes of machinery, will in a measure indicate the probable improvements and changes that the future will produce.
The functions and adaptations of machinery constitute, as already explained, the science of mechanical engineering. The functions of a machine are a foundation on which its plans are based; hence machine functions and machine effect are matters to which the attention of an apprentice should first be directed.
In the class of mechanical knowledge that has been defined as general, construction comes in the third place: first, machine functions; next, plans or adaptation of machines; and third, the manner of constructing machines. This should be the order of study pursued in learning mechanical manipulation. Instead of studying how drilling-machines, planing-machines or lathes are arranged, and next plans of constructing them, and then the principles of their operation, which is the usual course, the learner should reverse the order, studying, first, drilling, planing, and turning as operations; next, the adaptation of tools for the purposes; and third, plans of constructing such tools.
Applied to steam-engines, the same rule holds good. Steam, as a motive agent, should first be studied, then the operation of steam machinery, and finally the construction of steam-engines. This is a rule that may not apply in all cases, but the exceptions are few.
To follow the same chain of reasoning still farther, and to show what may be gained by method and system in learning mechanics, it may be assumed that machine functions consist in the application of power, and therefore power should be first studied; of this there can be but one opinion. The learner who sets out to master even the elementary principles of mechanics without first having formed a true conception of power as an element, is in a measure wasting his time and squandering his efforts.
Any truth in mechanics, even the action of the "mechanical powers" before alluded to, is received with an air of mystery, unless the nature of power is first understood. Practical demonstration a hundred times repeated does not create a conviction of truth in mechanical propositions, unless the principles of operation are understood.
An apprentice may learn that power is not increased or diminished by being transmitted through a train of wheels which change both speed and force, and he may believe the proposition without having a "conviction" of its truth. He must first learn to regard power as a constant and indestructible element—something that may be weighed, measured, and transmitted, but not created or destroyed by mechanism; then the nature of the mechanism may be understood, but not before.
To obtain a true understanding of the nature of power is by no means the difficulty for a beginner that is generally supposed ; and when once reached, the truth will break upon the mind like a sudden discovery, and ever afterwards be associated with mechanism and motion whenever seen. The learner will afterwards find himself analysing the flow of water, the traffic in the streets, the movement of ships and trains; even the act of walking will become a manifestation of power, all clear and intelligible, without that air of mystery that is otherwise inseparable from the phenomena of motion. If the learner will go on farther, and study the connection between heat and force, the mechanical equivalent of heat when developed into force and motion, and the reconversion of power into heat, he will have commenced at the base of what must constitute a thorough knowledge of mechanics, without which he will have to continually proceed under difficulties.
I am well aware of the popular opinion that such subjects are too abstruse to be understood by practical mechanics—an assumption that is founded mainly in the fact that the subject of heat and motion are not generally studied, and have been too recently demonstrated in a scientific way to command confidence and attention; but the subject is really no more difficult to understand in an elementary sense than that of the relation between movement and force illustrated in the "mechanical powers" of school-books, which no apprentice ever did or ever will understand, except by first studying the principles of force and motion, independent of mechanical agents, such as screws, levers, wedges, and so on.
It is to be regretted that there have not been books especially prepared to instruct mechanical students in the relations between heat, force, motion, and practical mechanism. The subject is, of course, treated at great length in modern scientific works, but is not connected with the operations of machinery in a way to be easily understood by beginners. A treatise on the subject, called "The Correlation and Conservation of Forces," published by D. Appleton & Co. of New York, is perhaps as good a book on the subject as can at this time be referred to. The work contains papers contributed by Professors Carpenter, Grove, Helmholtz, Faraday, and others, and has the advantage of arrangement in short sections, that compass the subject without making it tedious.
In respect to books and reading, the apprentice should supply himself with references. A single book, and the best one that can be obtained on each