Pollutants and Water Management. Группа авторов

---

Скачать книгу

---

Nitrate (mg/l) 2.00 2.26 3.49 2.58 ± 0.79 20–50 0.0007 Sulfate (mg/l) 26.53 33.00 33.23 30.92 ± 3.80 200–400 1.19 Chloride (mg/l) 12.59 10.21 25.74 16.18 ± 8.37 250–600 13.12 Calcium (mg/l) 37.24 6.71 41.07 28.34 ± 18.83 75–200 25.73 Magnesium (mg/l) 9.53 4.27 5.22 6.34 ± 2.80 30–100 10.23 Cr (mg/l) 0.09 0.10 0.11 0.10 ± 0.01 0.05 NA Mn (mg/l) 1.15 1.17 1.34 1.22 ± 0.10 0.5 NA Cu (mg/l) 5.65 5.95 7.08 6.23 ± 0.76 1.5 NA Zn (mg/l) 1.34 1.55 1.57 1.49 ± 0.13 15 NA Pb (mg/l) 1.55 1.66 1.82 1.67 ± 0.14 0.1 NA Cd (mg/l) 0.02 0.02 0.04 0.03 ± 0.01 0.01 NA

      NA: not available.

      ^a Ramakrishna et al. (2002).

      ^b BIS (1991).

      ^c IS:10500.

Figure 2.9 Water quality index of the Kanwar wetland.

      2.3.5 Sediment Quality

The sediment samples were analyzed for 15 parameters and compared with different sediment quality guidelines established by various agencies, which are summarized in Table 2.4.

      2.3.6 Heavy Metal Contamination and Health Risk Index

The health risk assessment is directly associated with the level of human exposure of the various contaminants, especially heavy metals through different mediums including air, water, and food items. In this study, the heavy metals were also estimated in the aquatic species and most frequently cultivated vegetation species, i.e. sorghum, wheat, grains, and rice, and compared with the standard permissible limits and the previously reported values for the same crops (Table 2.5). Further, the HRI due to heavy metal contamination was calculated as per the standard formula (Khan et al. 2010; Singh et al. 2018) and the guidelines of the United States Environmental Protection Agency (USEPA 2006) for the cultivated crop grains of wheat, maize, and rice to understand the potential human health issues of the dependent population (Figure 2.10).

Table 2.4 Sediment quality parameters of the Kanwar wetland.

Parameters	Current study
Physical parameters
WHC (%)	49.6–65.5
Bulk density (g/cc)	0.77–0.86
pH	6.5–8.76
Electrical conductivity (μS/Cm)	115–136
Macronutrients
Organic carbon (%)	0.14–2.7
Available N (mg/kg)	1110–5831
Available P (mg/kg)	79.1–665
Available K (mg/kg)	89–1017
Available S (mg/kg)	82.2–226.5
Micronutrients, i.e. heavy metals		Sediment quality guidelines
		GRSa	GDSb	UCCc Скачать книгу