3D Printing of Foods. C. Anandharamakrishnan
(2019) / With permission of Elsevier.
Figure 1.7 Stepper motor and its controlling mechanism.
Source: From Derossi et al. (2019) / With permission of Elsevier.
1.6.2.2 Mechanical Drive Systems
Irrespective of the type of structural configuration, the carriage arms are connected with a mechanical drive system for assisting its motion along X, Y, and Z directions. The drive systems consist of stepper motor‐operated in a pre‐defined step of pulses (Figure 1.7). This step‐up mechanism aids in the rotation of printer arms in full degrees (Horvath 2014b). In general, the step‐up motors consist of a stator and rotor. Based on the structural configuration and working principle, stepper motors are of three types: permanent magnet stepper motor, variable reluctance stepper motor, and hybrid stepper motor. Among these, hybrid steppers are the most used stepper motors for 3D printing applications as it combines the advantageous features of permanent and variable stepper motors. Other characteristics that define a stepper motor includes its dimensions and rotating power (torque). The United States National Electrical Manufacturers Association (NEMA) declares a dimensional number to stepper motors named NEMA’s number based on the length and associated torque (Derossi et al. 2019). Apart from guiding the movement of carriages, stepper motors are also used for controlling the amount of material deposited during printing.
1.6.2.3 Microprocessor Controlling System
The motherboard is the heart of any 3D printer, responsible for coordinating the motion of components like the extruder, print bed, motors, and sensors. End stops are provided at all the carriages that act as sensors and allow 3D printers in identifying printing locations along the three axes, preventing it from moving past its limit otherwise it could result in hardware damages (Horvath 2014b). An interface arrangement of liquid crystal display (LCD) replicating rapid prototyper (REP RAP) full graphics smart controller is provided for controlling the printing process. Firmware refers to a set of computer programmes and instructions that connects the software with hardware (Horvath and Cameron 2015). The integration of software with hardware is detailed in the subsequent sections. A 3D printer with an LCD user interface can work as a standalone machine (using an SD card), i.e., it can be controlled without connecting to the computer. Although there are different kinds of user interfaces, the most common one is a basic LCD interface operated via a knob/dial. The printer can be operated with both LCD interface as well as universal serial bus (USB) assisted interface system connected with computer. Based on the working capacity and build size, the power requirement will vary. Often the printing process was carried out by connecting the printer to a computer via a USB cable. Files can be transferred and read either through an onboard controlling unit or through a USB external interface with a computer or through both of these (Horvath 2014a). The user interface/controller allows the user to send machine‐readable computer codes to the 3D printer and assists in changing some of the parameters during run time and move the print head along the X/Y/Z‐axis. Most of the 3D printers are lab‐scale and can be operated at a power supply of 110 V/230 V AC, 50/60 Hz.
1.7 Software Requirements and Hardware Integration
3D model designing involves the creation of 3D models using designing software such as AutoCAD (Autodesk), SolidWorks (Dassault Systèmes), SketchUp (Trimble), Rhinoceros 3D (Robert McNeel & Associates), etc. All this software allows the users to design their desired 3D model. After designing, the stored file can be converted to STL format to fed to a 3D printer. Model building requires professional knowledge and skilled personnel to create the desired 3D model. However, with the advancements of technology designing models have become easier. Software like 3DSlash and Tinkercad are specially designed for students and beginners (Guo et al. 2019). It also allows the users to design their model on an online platform rather than downloading the software itself. Sometimes designing a 3D model may consume time for which software like Autodesk 123D catch helps in building a 3D model from the 2D image that saves time and aids in achieving the same precision as designing from 3D model software (Parras et al. 2018).
After model designing, the stored information of the 3D model in STL format is read/sliced in a layer‐by‐layer manner by using appropriate slicing software. The slicing process involves the extraction of actual information of the 3D model and transforms it into G and M codes which are readable by 3D printers. G codes are the numerical language generated by CAD software that is computer readable which guides the motors and assists in the motion of printing arms to the printing region. On the other hand, M codes are the auxiliary commands that aids and assists in machine functioning (Horvath and Cameron 2015). Most commonly used slicing software includes Cura, Simplify3D, Repetier, Slic3r, Craftware, SelfCAD, SliceCrafter, and Astroprint (Table 1.1). Various process parameters that determine the final printing quality includes printing speed, retraction speed, layer height, printing temperature, nozzle size, number of outer shells, and infill percentage. Thus, slicing software allows the user to define the above printing parameters and aids in achieving good precise printing with higher resolution. All this setting information about the 3D model is fed to the printer in form of computer codes. G codes would have been written in numerical form and it slightly varies from printer to printer. The general commands commonly used are G0 (fast linear motion) and G1 (linear motion) which are referred to as the movement of the arms. For illustration, ‘G0 X nnn Y nnn Z nnn E nnn F nnn S nnn ’ represents a command in which X nnn , Y nnn , and Z nnn denote the position of X, Y, and Z‐axis; E nnn denotes the position of E axis, i.e. motion of print head stepper motor, F nnn denotes the speed of arms (mm min−1) and S nnn denotes the function to verify limit switch or not (S0 – do not check and S1 – check) (Guo et al. 2019). However, the entire 3D object can be printed using a complex command of G codes that requires more knowledge and skill in computer coding.
Table 1.1 Common slicing software used in 3D printing.
| Software | Developer | Users | Description | Compatibility | Price |
|---|---|---|---|---|---|
| Cross platform tools | |||||
| Cura | Ultimaker | Beginners and advanced users | Open source, fast, and easy to useIts application is not just limited with Ultimaker 3D printer and can be used for other 3D printers as well | Windows, Mac, Linux | Free |
| CraftWare | CraftWare | Beginners and advanced users | Fast and easy to usePossess impressive G code visualizer and friendly support than other software | Windows, Mac | Free |
| KISSlicer | KISSlicer | Beginners and advanced users | Easy and flexible software that results in excellent slicing |
| |